Community Q&A Question: 92 GT

Asking About: Mustang 1993 Cobra Rear Calipers (87-93)


92 GT

What would I need to do in order for these to work on my 92GT coupe. I'd like to convert the rear to disk while retaining the 4 lug axles. you know, budgeting
from greenville |
0 0

Accepted Answer
You would need the brackets to mount the calipers, part # LRS-2100D-K and the rotors, part # LRS-2026C. You will also need to convert to brake hoses going to the caliper, part # mm-mmbk7p will work with the 1993 cobra calipers. Increasing the brake pressure to the rear brakes is a must also. To do that you will need a 1993 cobra master cylinder, LRS-2140D and adapter MM-MMBAK3. Then you will need to gut the part of the proportioning valve going to the rear brakes and plug it with part number M2450A and add an adjustable valve going to the rear brakes, part number M2328C.
from Waco |
2 0 Staff Member Post!

Answer This Question

Question About

  • $229.99