Community Q&A Question: stock bottom end 302

Asking About: Mustang AFR Cylinder Heads 185CC Stud Mount (79-95) 5.0 5.8


stock bottom end 302

will these heads work on a 302 with a stock pistons? Also how will these AFR185 heads do with Comp cams XE270HR (512lift w/1.6rr), ported typhoon manifold, 24lb injectos?
from 08360 |
1 0

These heads would work fine with the stock block. You will need to check the piston clearance because these have larger valves. the rule of thumb is anything over .500 lift requires checking the piston clearance.
from TROY |
1 0 Staff Member Post!

Answer This Question