Community Q&A Question: 8.8 With 87-88 TurboCoupe Disc brake brackets.

Asking About: Mustang Moser 31 Spline, 5 Lug Axles w/ 94-04 Flange (79-93)


0

8.8 With 87-88 TurboCoupe Disc brake brackets.

On my 85 I'm running a Stock 8.8 mustang rear-end with 31spline Moser axles with the 87-88 TurboCoupe Disc brake brackets welded on. Can I buy these and then just get new rotors?
from Owenton |
0 0

0
If you are using OEM turbocoupe brake brackets you might run into issues with the offset being wrong. The easiest thing to do to make sure it will all line up correctly is use the North race car brackets that are designed to use the stock length fox axle and the turbocoupe rear disc calipers. You can find those brackets here.

https://lmr.com/item/LRS-2100D-K/Mustang-Rear-Disk-Brake-Caliper-Adapter-Brackets
from hewitt |
0 0 LMR.com Staff Member Post!


Answer This Question