Community Q&A Question: Dimensions of bushing

Asking About: Mustang Window Guide Bushing (83-93)


Dimensions of bushing

Can you please give me the bushing dimensions. Include both the inside dimensions (where the guide bar runs through) and the lip on the outside where they snap into the bracket. Trying to determine what other models these might fit. Thanks!
from Amarillo |
0 0

Accepted Answer
Inside opening is 1/2" x 6/8". Outside rim is 1" 1/8 x 7/8". The clips are 6/8" apart on the long sides and exactly 1" on the short sides. I hope that answers your question.
from Plainview |
0 0

Thanks for that! On the clip side I'm looking for the dimensions on the clip that would correspond with the hole in the metal bracket. If I had one in my hand I would measure underneath the clip "tabs". Hope that makes sense! - Daniel last year

The tabs are 1/16" thick at the tab base so if I understand correctly that would be 1/16th wider than the inside hole's dimension's. - Tyson last year

If your driving through Plainview anytime soon I'd let you measure it yourself. - Tyson last year

I don't have plans to, but thanks for your responses and the offer! I think your last answer is enough for me to figure it out! Much appreciated! - Daniel last year
add a comment

Just to summarize/clarify the above conversation:

The inside dimension of the clips (where the vertical guide bar passes through) measure 1/2" x 3/4"
They should fit a hole in the bracket of 5/8" x 7/8"

Thanks again Tyson for taking measurements!
from Amarillo |
0 0

Answer This Question

Question About