Community Q&A Question: E 205 with carb

Asking About: Mustang Edelbrock E-Series 205cc Cylinder Heads - 60cc Chamber (79-95) 5.0/5.8


E 205 with carb

Building an old 1930 coupe with a 331 stroker motor (1995 block), looking for heads. Forged pistons etc, will be 10.0 compression with 60 cc heads. Phase 1 build will be a single 4bbl carb with a 2 plane intake and mild 270 comp roller cam. Trans is an AOD with 3.25 rear gears. Would you recommend the e-205 heads or would the smaller heads be better?
from Placentia |
0 0

These heads would perform well with the 331 stroker kit. You would also have plenty of wiggle room to go with a larger cam down the road if you desire.
from Hewitt |
0 0 Staff Member Post!

Answer This Question

Question About

  • $1,340.50
    Edelbrock Logo