Community Q&A Question: I am trying to determine what rear hoses I need. '89 Coupe with Fox length 5 lug axles, cobra brakes

Asking About: Mustang J&M Rear Stainless Steel Brake Hoses (99-04)


0

I am trying to determine what rear hoses I need. '89 Coupe with Fox length 5 lug axles, cobra brakes

I have an '89 LX Coupe with a Fox 8.8 housing, 5 lug Fox length axles, north racecar cobra caliper brackets, 11.65 cobra vented rotors and calipers. I have stock style Fox stainless rear hard lines I can cut and flare at any length. Just want to know what rear flex lines I need to go from my hard line to caliper and have the flex line bracket mount to the axle housing.

THANKS!
from San Tan Valley |
0 0

5
Accepted Answer
Aaron, the kit you need is a different part number, the SN-95 94-04 style 11.65 rear brakes were used on the 94-04 Mustang Cobra, 2001 Bullitt and the 2003-2004 Mach 1 Mustangs. The kit you need to work on a Fox Mustang conversion is JM-22520, this will allow you to fab up your own lines and connect to these stainless flex lines. .
from Hewitt |
0 0


0
Aaron, the kit you need is a different part number, the SN-95 94-04 style 11.65 rear brakes were used on the 94-04 Mustang Cobra, 2001 Bullitt and the 2003-2004 Mach 1 Mustangs. The kit you need to work on a Fox Mustang conversion is JM-22520, this will allow you to fab up your own lines and connect to these stainless flex lines. .
from Hewitt |
0 0


Answer This Question

Question About