Community Q&A Question: Cylinder heads

Asking About: Mustang Edelbrock E-Street 170cc Cylinder Heads - 1.90/1.60 Valves - 60cc Chamber (79-95) 5.0/5.8


Cylinder heads

Would these work good with a stock cam, explorer intake and vortech v3sci? I have heard questionable quality concerns on the valve springs. Any info would be appreciated
from Decatur |
1 0

These will have a spring rate up to .550 lift, they will be more than enough for a stock spring.
from waco |
0 0 Staff Member Post!

Cylinder head springs are made for hydraulic flat tappet lifters ONLY! such as non roller blocks. YOU MUST CHANGE THE SPRINGS IN ORDER TO RUN HYDRAULIC ROLLER LIFTER CAMS!!!!!!!!!!!!
from sound beach |
0 0

Answer This Question

Question About