Community Q&A Question: upgrade

Asking About: Mustang Team Z Metal Matrix Tubular K member Kit (79-93)



I want to upgrade my 92 kmember it has 98 spindles will this fix the horrible bump steer I have since I'm not using 95 spindles ..? And what is os needed to but to be able to install this ?
from Oakland |
0 0

Accepted Answer
That would be everything you need to install it. Don't think that would help you on the bump steer. I would look at a steeda bump steer kit
from Lorena |
0 0 Staff Member Post!

Info I was Given

not install a 1996-04 spindle on a 1979-93 Mustang fitted with a stock-geometry k-member! Doing so will significantly increase bumpsteer because...
The steering arm on the 1996-04 spindle is about 1.02" (26mm) lower (relative to the rest of the spindle) than the steering arm of any 1979-95 spindle.
The lower steering arm forces the outer tie-rod end to a lower position.
That new position is far too low for the steering rack location of any 1979-93 Mustang, and radically changes the steering geomet
- carlos 3 years ago
add a comment

Answer This Question

Question About

  • $649.99
    Team Z Motorsports Logo