Community Q&A Question: What adjustable rocker arms and studs can I order for these heads?

Asking About: Mustang SVE Performance Aluminum Cylinder Heads (79-95)


0

What adjustable rocker arms and studs can I order for these heads?

I have an E303 cam and looking to get a ported and polished Cobra Intake for my 92 Notchback. I have an auto tranny. Also getting the BBK ceramic coated unequal length headers. What else is needed?
from Mandeville |
0 0

0
We recommend part number PFM-66911 for the rocker arms. As for what is needed, you are on the right track. I would also recommend running 24lb injectors as 19lb will be at the end of their capability with these heads and that cam. With that will be the need to match the maf with the injector size. That will cover you as far as the core parts needed to perform this swap.
from Hewitt |
0 0 LMR.com Staff Member Post!


What about the studs or those come with the heads already? Think I will go with the SVE intake you have as well. So also need 24lb injectors and then the MAF to match. What about Throttle body? Anything else I am missing? - Matthew last year
add a comment

0
Ford head studs, we recommend part number ARP-1543601 and TFS-51400419. Below is the list of part numbers we include in our top end kit. These are what we recommend to install these heads.
M6051B51.
M6565L302.
M6584A50
M9448B302
MG-5835

As for throttle body, we recommend a 70mm size throttle body. If you are running a factory fuel pump, I'd recommend upgrading that and getting an adjustable fuel pressure regulator to fine tune. That should pretty well cover you if you plan to run the SVE intake.
from Hewitt |
0 0 LMR.com Staff Member Post!


Would a 75 mm throttle body work with 30lb injectors? - Matthew last year
add a comment

0
A 75mm throttle body would be fine, but those injectors will be too big for that application. I'd recommend 24lb.
from Hewitt |
0 0 LMR.com Staff Member Post!


Answer This Question

Question About