Community Q&A Question: Is the SVE intake a good one to go with this? I have a 92 Ford Mustang LX Notchback.

Asking About: Mustang Ford Racing GT40x Cylinder Head 64cc (79-95) 5.0L/5.8L


0

Is the SVE intake a good one to go with this? I have a 92 Ford Mustang LX Notchback.

I have an auto tranny. Gonna also order the bbk ceramic coated unequal length headers. Anything else is needed for this? I have a Pro M 80mm mass air and filter, bbk 75mm tb and accel injectors for 30lbs. Also have a sct chip for the injectors, so I know this will need a tune. Do I need an EGR spacer or can I get by without one?
from Mandeville |
0 0

0
Most will run a 24lb injector on a 5.0 bottom end with these heads. As long as you have the proper tune for 30lbs, then a tuner should be able to make them work. The rest of it you pretty well have covered. On the EGR spacer, that will depend on what intake manifold you are running. I'd definitely get something that flows well for these heads as the stock intake is way too restrictive.
from Hewitt |
0 0 LMR.com Staff Member Post!


0
Forgot to mention the SVE intake would be a good candidate for this setup. An EGR spacer would be recommended with that intake.
from Hewitt |
0 0 LMR.com Staff Member Post!


Answer This Question