First of all If you have an LX 5.0 your Quad shocks may need to be reversed or removed for proper fitment. And if you have a 2.3 4-cylinder car it requires a wheel spacer OR upgrading to 1987-1993 5.0 struts, spindles & brakes so you don't lose any of your turning radius. I can tell you, however, that I run the 17x8/10 setup on my '93 LX hatch 2.3L. Currently it sits on SVE Lowering springs out back and the UPR coil over kit up front and, other than the spacer for the front wheels, all I had to do was roll the inner rear fender for the 10 inch wide rear wheels/tires to prevent sidewall scraping and unwanted tire wear. These being the 9 inch wide rear wheels/tires a fender roll may be beneficial, but there should be no clearance issues regarding this wheel kit.