Community Q&A - New Questions


Results 1 - 25 of 6337

chin spioler

what color is this part?

Asked by mark h. from overland park | 12 months ago
Asked about: Mustang Replacement Chin Spoiler - V6 (10-12)

75w 90 differential fluid

Should I use 75w 90 on 98 base model Mustang.

Asked by Chris S. from Hoover | 12 months ago
Asked about: Royal Purple Max-Gear Gear Oil & Friction Modifier Kit 85W140

what MAF to use.

I can't seem to find a MAF to use on this from your site. I looked on pro-M and they have a M 92 that I think will fit but it says 89+ and I have an '88. What one should I use/can I use?

Asked by Talbert f. from puyallup | 12 months ago
Asked about: Mustang Anderson 4" Power Pipe for 90mm Throttle Body w/ PRO-M Short MAF (86-93)

Does 190 lph pump need adjustable regulator

I have a mostly stock configuration. Explorer intake with newer (4 hole) 19lb injectors, 70mm MAF, headers, off road H-pipe, screamin demon coil and 190lph pump. Will the stock FP regulator work with that big of a fuel pump? Or will the fuel pressure be too high?

Asked by Danny B. from Huntersville | 12 months ago
Asked about: Mustang 190 Lph Walbro Gss242 Fuel Pump (86-97)

Would these fit Forgestar F14?

I had to get open ended lugs because the holes on the wheels were smaller, and I would really like a lock on my new wheels.

Asked by Michael G. from Plano | 12 months ago
Asked about: Mustang Locking Lug Nut Kit

Master cylinder cap seal

Could you please tell me if this cap comes with the rubber seal inside

Asked by Tina S. from Barre | 12 months ago
Asked about: Mustang Brake Master Cylinder Reservoir Cap (87-04)

91 LX

I have weld drag lites on my car. I think the fronts are 3.5, maybe they are 3's. My front passenger side fits fine, but my drivers side hit the bracket on the outer brake pad. Will these work fine for my car?

Asked by kelcey b. from madison | 12 months ago
Asked about: Mustang 8mm Wheel Spacer, Pair (79-93)

Difference between chrome shorty headers and ceramic coated

Is there a difference between the chrome and ceramic coated? which one would be the best option last longer and prevent leaks? Thanks!!

Asked by Steven B. from Miami | 12 months ago
Asked about: Mustang BBK Shorty Headers Ceramic Coated (96-04) 4.6

stock?

will these ever be back in stock?

Asked by Bryan N. from North Reading | 12 months ago
Asked about: Mustang Staggered FR500 Wheel & Tire Kit - 17x9/10.5 Anthracite (94-04)

Wheel match up?

It says the wheels are for 05-15, If that's the case, Why don't my Steeda wheels for my 08 gt fit on my 2015? Lugs are thicker on the 15.

Asked by Travis C. from Holiday | 12 months ago
Asked about: Mustang SVE Series 3 Wheel & Tire Kit - 19x9/10 Gun Metal (05-14)

fitment

Will these fit an 8.5" wheel?

Asked by daniel r. from mechanicsville | 12 months ago
Asked about: Nitto NT05 Tire - 275/35/19

tracction barrs

where the brakets for the diferrensial are bolt on, whit a u bolts or over the spring brakets?

Asked by jorge o. from manteca | 12 months ago
Asked about: F-150 SVT Lightning Stifflers Long Bar Traction System (99-04)

horse power

horse power rating for this driveshaft i need one for 535hp

Asked by Rodney D. from Erlanger | 12 months ago
Asked about: Mustang Ford Racing Aluminum Driveshaft 31 Spline (79-04)

Compatibility

Will this fit onto a 92 lx mustang that was originally a 4 cylinder?

Asked by Nick S. from ortonville | 12 months ago
Asked about: Mustang Bilstein Shock/Strut & SVE Spring Kit (87-04)

Screamin Demon Ignition Coil

I have Trick Flow twisted wedge heads, stock distributor, bosch wires, and motorcraft plugs, would this be a good fit for my car, and what types of plugs and gap would I use with this ignition coil?

Asked by Rich C. from Taylor | 12 months ago
Asked about: Mustang Screamin' Demon Ignition Coil (84-95) 5.0 5.8

stock 93 gt

is the stock rear differential on a 93 gt convertible an 8.8" ? if so, am i going to use both complete bottles plus the friction modifier/

Asked by james c. from derby | 12 months ago
Asked about: Mustang 8.8" Rear Differential Fluid & Seal Kit (86-04)

Would I have to change my stock manifold intake

Would I have to change my stock manifold intake

Asked by Jose L. from Sacramento | 12 months ago
Asked about: Mustang BBK 73mm Throttle Body Intake Plenum (96-04) 4.6

ANY GAINS??

I currently have A explorer intake on my 90lx will the SVE intake flow the same or will this be an upgrade from that?
And will the TB & spacer make the same annoying whistle as the BBK setup i have now?

Asked by raymond g. from palm bay | 12 months ago
Asked about: Mustang SVE 5.0 Performance Intake Manifold w/ 70mm Throttle Body & EGR Spacer (86-93) 5.0

Low Profile Track

Is the the low profile seat track Eric G. asks about the cure for most peoples complaints that the new seats sit too high? Why is that part number a call-in only thing? Thank you in advance.

Asked by Angelo D. from Temple | 12 months ago
Asked about: Mustang Corbeau Double Locking Seat Track (79-98)

Mounting

Will this bolt on or does it have to be welded?

Asked by Ian H. from Columbus | 12 months ago
Asked about: Mustang SVE Subframe Connectors Black (79-04)

Cobra

Is this the same steering rack on the cobra if not which one is?

Asked by Ian H. from Columbus | 12 months ago
Asked about: Mustang Power Steering Rack Kit (85-93) 5.0

question

could they be used for street use?

Asked by Gilberto P. from pasadena | 12 months ago
Asked about: F-150 SVT Lightning Bassani Off-Road Mid-Pipe Stainless (93-95) 5.8

t-stat

does this housing have a spot for the coolant tem sensor?

Asked by james b. from woodbridge | 12 months ago
Asked about: Mustang Thermostat Housing (79-95) 5.0L 5.8L

Will they fit??

Will the staggered set fit under a stock 04, or do I need to modify the rear end for the bigger rim and fire size?

Asked by John W. from pocatello | 12 months ago
Asked about: Mustang Staggered Bullitt Wheel & Tire Kit Anthracite 17x9/10.5 (94-04)

John Bryant

What is best way to remove original center caps and to install spinner caps?

Asked by John B. from New Canton | 12 months ago
Asked about: Mustang Spinner Center Cap (05-10)