4" Anderson Power Pipe
This Anderson naturally aspirated power pipe is designed for Pro-M 90 shorty meter on 1994-1995 Mustang 5.0L applications. Anderson Power Pipes feature mandrel bent 4" ceramic coated (inside and out) pipe that puts the mass air and air filter in the inner fenderwell for a cooler intake charge for added horsepower. The Anderson Power Pipe also creates better driveability for Mustangs with bigger profile camshafts.
AFM naturally aspirated power pipes were developed because of the need for higher volume, better flowing intake pipes needed with the higher RPM 4.6/5.0 and the bigger cubic inch 347/408. With the volume of air these engines need, the small factory rippled intake pipes are too restrictive. They rely on the cooler intake charge to gain more power. AFM dyno's each Power Pipe® to verify horsepower gains. The mass air is moved to the inner fenderwell, but they do not rely on the cooler intake temps to make the extra power - they do it in design and testing.
-Comes with inlet to fit 90mm throttle bodies.
-Does not include Mass Air Meter or Air Cleaner.
-Works with Abaco DBX-97, 77-83mm Pro-M or 95mm Velocity meters.
-Provision for intake air temperature sensor must be enlarged to fit threaded air intake temperature sensor. Intake air temperature sensor is moved to rubber intake coupler.
- Fits 1994-1995 Ford Mustang using Pro-M 77mm or 83mm Short Style MAF. Also fits Pro-M 95mm Velocity MAF
Anderson Ford Motorsport was started in 1989 to meet the growing demand of Mustang performance parts. Since then, they have made a name for themselves in the business and have grown to be one of the largest Mustang performance centers in the Midwest. They produce and manufacture their own line of specialty parts to give your Mustang more horsepower, torque, and performance. With a wide selection of cams, camshafts, valve springs, and other valve train components, Latemodel Restoration is your #1 source for Anderson products.