Benefits
- Automatic Data-Logging
- GPS Track Mapping
- Easy To Use Interface
- Plug-N-Play Installation
Features
- Powerful Bluetooth Connection
- Measures Performance Stats
- Alarms & Alerts With Sound For Set Parameters
- Read/Clear OBD-II Codes
Autometer Dashlink 2.0 Bluetooth Digital OBD-II Gauges
Monitor all of your OBD-II specific information from the palm of your hand with Autometer's Dashlink 2.0 gauge system! Autometer designed the Dashlink 2.0 to easily install into your OBD-II service port, and stream various parameters to your Apple or Android device, via the Dashlink app. Monitor vehicle performance and parameters, data-log performance, track fuel economy, check and clear engine codes, and much more; all from your Apple or Android device. There is no more need to run wires, install gauge pods, or strip wires! Installation requires less than 5 minutes of your time and does not require any modifications to your interior!
Monitor & Log Performance Data
Professional skid pad shows lateral and accel/braking Gs with min/max indicators.
Race track visually maps out your location, acceleration and braking as you drive laps around the track which allows you to visually analyze different race track laps to see how acceleration and braking changed from lap to lap, thus helping you to improve your lap times on your next outing.
Inclinometer shows rolling angle and vehicle pitch for off-roading.
Support for OBD-II diagnostics. Find out why your check-engine light is on and clear diagnostic trouble codes (DTCs)
Data logging, record and playback log files showing OBD-II and acceleration data.
Display Parameters
Performance Gauges
Engine Speed
Vehicle Speed
Estimated HP and Torque
Engine Coolant Temp
Manifold Absolute Pressure
Lambda/Wideband (AFR)
Fuel Pressure
Ignition Timing
Intake Air Temp
Ambient Air Temp
Mass Airflow
Fuel Trim - Short and Long Term
Engine Load
Catalyst Temp
0-60 MPH
1/8 & 1/4 Mile Times
Accelerometer (Pitch, Roll, Forward, and Lateral)
Fuel Economy Gauges
Instant Fuel Economy
Average Fuel Economy
Distance Traveled
Distance/Time to Empty
Fuel Level
Distance Travelled
Fuel Consumed
Elapsed Drive Time
Average CO2 Emission Rate
Total CO2 Emission
Number of Fill-Ups
Average Fuel Flow
Average Speed
Idle time
Emissions
Read and Clear Diagnostic Trouble Codes
Monitor Readiness Status
Loop Status
O2 Sensor Voltage
Along with these features, the Dashlink system has an integrated trip computer that maintains stats for up to 5 trips. You can log distance traveled, fuel consumption and economy, drive time, and countless other statistics.
Application Notes
Compatible with OBD-II and EOBD compliant vehicles
DashLink is not compatible with older Apple hardware. The easiest way to tell if it works appears to be if the device has a “lightning connector” rather than the old iPod style 24-pin connector.
Manufacturer-specific data is available for select vehicles, through In-App purchase.
Apple and Android device not included with purchase.
Depending on vehicle model and year, not all parameters will be available.
Parameters available are dependant on vehicle year/make/model/trim. Not every vehicle will have all parameters available in the OBDII data. Enhanced manufacturer specific data is available for select vehicles through In-App purchase.
DashLink II is compatible with Apple iOS and Android smartphone or tablet mobile devices (not included). Made for: Apple iPhone® X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPad® (2017), iPad Pro® (9.7 inch), iPad Pro (12.9 inch), iPad Air™ 2, iPad mini™ 4, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad® (4th Gen), iPod Touch® (5th and 6th Gen). DashLink II is compatible with Android devices running operating system 4.0 or later.
Installation Note
This device will not work with the SCT ITSX #SCT-4015, or with any other OBD-II monitored devices, as there is only 1 OBD-II port.
AutoMeter Limited Warranty - Click Here