Bilstein & SVE Suspension Starter Pack
Overhaul your 1987-89 Mustang 5.0 ride quality and handling with this Bilstein & SVE suspension starter pack! By now the factory suspension components are usually blown out or worn out, causing an overall bad ride quality. This kit is a direct replacement for your original components, and will dramatically increase the handling performance of your Mustang. Bilstein's B6 HD series shock and strut kit will tighten up your suspension for increased handling while maintaining a great ride quality. New caster/camber plates are included to correct your suspension geometry after installation!
The B6 HD series features a monotube gas pressure design that is non-adjustable for ease of use and takes your Mustang's suspension to the next level. The included dust boots will keep road debris at bay for a long lasting shock and strut kit. Finished off in the classic Bilstein yellow and blue. This kit includes both front struts and two rear shocks.
SVE Mustang lowering springs are made in the USA by a leading suspension engineering company and have been designed to our exact specifications for the best performance and appearance on the market. The spring rates for the SVE Mustang lowering springs are 571 LB/IN linear rate for the front spring and 200/251 LB/IN progressive rate for the rear springs. New polyurethane spring isolators are included to install with the springs.
SVE Caster/Camber Plates
To correct your alignment after installation, a set of SVE caster/camber plates are included. Unfortunately, when you lower your Mustang, there is not enough adjustment in the factory strut mounts alone to bring camber and caster back into the proper geometrical correction. SVE's caster/camber plates allow you to dial in your suspension to prevent tire wear, and maximize the performance of your new suspension!
Not recommended for convertible Mustangs due to the difference in chassis weight compared to a coupe/hardtop.