2015-17 Ford Mustang BMR Sway Bar Kit Black Hammertone - S550 by BMR Fabrication

Mustang BMR Sway Bar Kit Black Hammertone (15-17)

Details   |  Description   |  Customer Photos   |  Reviews
  • 2015 Mustang Front and Rear Sw
  • 2015 Mustang Front and Rear Sw
Mustang BMR Sway Bar Kit Black Hammertone (15-17)
  • 2015 Mustang Front and Rear Sw - bmr 2015 swaybar kit SB043H
  • 2015 Mustang Front and Rear Sw - bmr swaybar kit 2015

Reduce body roll & understeer in your 2015-2017 Mustang with BMR's front & rear sway bar kit!

Item #BMR-SB043H

Everyday Low Price: $479.95

In Stock
Ships tomorrow!

Add to cart


  • Improved Handling
  • Reduces Body Roll
  • Reduces Understeer
  • 28%-70% Increase In Sway Bar Rate


  • Black Hammertone Finish
  • 35mm/25mm DOM Tubing
  • 3-Way Adjustable
  • Polyurethane Bushings

What's in the Box

  • (1) Front Sway Bar
  • (1) Rear Sway Bar
  • Front Sway Bar Bushings
  • Rear Sway Bar Bushings
  • Installation Hardware

Made in the USA

Product Description

BMR Performance
Increase the handling performance of your S550 with BMR's all new 2015-2017 Mustang sway bar kit! These beefy sway bar's are 3-way adjustable so you can fine tune your suspension to maximize your performance for the street, autocross, or road race course. The 35mm front and 25mm rear sway bars will dramatically reduce body roll and understeer for the best handling experience possible. The adjustable design increases your sway bar rate anywhere from 28% to 70% over the factory sway bar, depending on what setting you use. All of this is attached with 88 durometer polyurethane bushings for reduced deflection over the stock rubber bushings.

BMR Quality
This 2015-2017 Mustang BMR sway bar kit is constructed with the finest materials and craftsmanship you can ask for. BMR factors in vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Giving you the feel of a custom suspension improvement. BMR manufactures the sway bars from heavy duty DOM steel tubing (35mm front/25mm rear) that is cold formed to resist torsional fatigue and retain it's "memory". The hollow design provides an immense amount of strength with the lightest weight possible. All of this is finished in a black hammertone powder coat finish.

Sway Bar Specs
- Front: 35mm
- Rear: 25mm
- Three way adjustable.
- 88 Durometer, greasable polyurethane bushings.
- Zinc-plated inner sleeves
- Billet aluminum, black anodized front bushing saddles.
- Black Hammertone powder coat finish.

-Fits 2015-2017 Ford Mustangs

Bushing Lubrication
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.

BMR Warranty - Click Here

Related Articles

  • Mustang Sway Bar Size Guide

    Sway Bar Guide Some of the most common questions asked when it comes to Stang suspension are the Mustang sway bar sizes. This chart gives you the stock Mustang sway bar sizes to assist you in buying the correct replacement bushings or deciding on an upgraded bar. This guide shows you Fox Body, SN-95, New Edge, S19... more

    Read more: mustang , 79 93 mustang , 94 04 mustang , 05 09 mustang , 10 14 mustang , 2015 mustang

    Posted on 6/12/2015

  • Customer Photos (1)

    Product Reviews (1)

    out of 5 stars
    5 stars
    1 reviews
    5 stars    1
    4 stars    0
    3 stars    0
    2 stars    0
    1 star    0

    1 of 1 REVIEWS
    1 of 1 REVIEWS

    5 Stars   BMR Sway bar kit on 2016 GT PP
    By on 7/19/2016
    Image uploaded by Jeffery D. I bought the BMR sway bar kit based on a recommendation from LMR.

    The product arrived wrapped and packaged nicely. Installation on my 2016 did require a minor bit of fabrication on the rear brake line brackets. I had to use my cut off wheel and a bench grinder. The rear brake line bracket is bent in a shape to help with location of the bracket to sway bar mounting. Installation of the BMR rear adjustable sway bar either requires a new bracket that is flat and allows for mounting the brake line as well as not losing the ability to use any one of the 3 possible end link holes.

    I did not receive the flat bracket, so I used a cut off wheel to remove the angled section of the stock bracket. And the bench grinder was used to finish and smooth the area that was cut.

    The front installation was straight forward and the use of the billet sway bar brackets and hex head bolts made final mounting of the sway bar easy.

    All of my work is done using jack stands, a creeper and wheeled stool.

    Yes, I would recommend this item to a friend!

    Was this review helpful to you?

    Vehicle Applications

    Ford Mustang - 2015 (15) - 2016 (16) - 2017 (17)

    About This Brand

    BMR Fabrication
    BMR fabrication is one of the top manufactures of Mustang suspension components that both improve performance and increase traction. With a full line of control arms, panhard bars, shock tower braces, k-members, anti-roll bar kits, and drive shaft safety loops, you can have your muscle car handling better than ever. All BMR components are engineered to fit with precision, hold up to the extreme demands of racing, and give you the edge over your competition!

    Look for Similar Items by Category

    2015-2017 Mustang Parts » 2015-2017 Mustang Suspension Parts » 2015-2017 Mustang Sway Bars
    Ford Mustang Parts » Mustang Suspension & Chassis » Mustang Sway Bars & Bushings » Mustang Front & Rear Anti-Sway Bar Kits
    Ford Mustang Parts » Mustang Suspension & Chassis » Mustang Sway Bars & Bushings » Mustang BMR Sway Bars

    Products by Vehicle