In observance of Memorial Day our business will be CLOSED Monday, May 29, 2017.
Reduces Body Roll
28%-70% Increase In Sway Bar Rate
35mm/25mm DOM Tubing
What's in the Box
(1) Front Sway Bar
(1) Rear Sway Bar
Front Sway Bar Bushings
Rear Sway Bar Bushings
Increase the handling performance of your S550 with BMR's all new 2015-2017 Mustang sway bar kit! These beefy sway bar's are 3-way adjustable so you can fine-tune your suspension to maximize your performance for the street, autocross, or road race course. The 35mm front and 25mm rear sway bars will dramatically reduce body roll and understeer for the best handling experience possible. The adjustable design increases your sway bar rate anywhere from 28% to 70% over the factory sway bar, depending on what setting you use. All of this is attached with 88 durometer polyurethane bushings for reduced deflection over the stock rubber bushings.
This 2015-2017 Mustang BMR sway bar kit is constructed with the finest materials and craftsmanship you can ask for. BMR factors in vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Giving you the feel of a custom suspension improvement. BMR manufactures the sway bars from heavy duty DOM steel tubing (35mm front/25mm rear) that is cold formed to resist torsional fatigue and retain it's "memory". The hollow design provides an immense amount of strength with the lightest weight possible. All of this is finished in a red powder coat finish.
Sway Bar Specs
- Front: 35mm
- Rear: 25mm
- Three way adjustable.
- 88 Durometer, greasable polyurethane bushings.
- Zinc-plated inner sleeves
- Billet aluminum, black anodized front bushing saddles.
- Red powder coat finish.
- Fits 2015-2017 Ford Mustangs
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
Sway Bar Guide
Some of the most common questions asked when it comes to Stang suspension are the Mustang sway bar sizes. This chart gives you the stock Mustang sway bar sizes to assist you in buying the correct replacement bushings or deciding on an upgraded bar. This guide shows you Fox Body, SN-95, New Edge, S19... more
BMR fabrication is one of the top manufactures of Mustang suspension components that both improve performance and increase traction. With a full line of control arms, panhard bars, shock tower braces, k-members, anti-roll bar kits, and drive shaft safety loops, you can have your muscle car handling better than ever. All BMR components are engineered to fit with precision, hold up to the extreme demands of racing, and give you the edge over your competition!