Canton Coyote Swap Oil Pan
This Canton oil pan is designed for 5.0 Coyote motor swaps in 1979-2010 Mustangs. With a rear sump design, you get K member clearance when swapping to the 5.0 Coyote, making it the perfect performance oil pan for street or strip applications. It features a built in slosh baffle for oil control to keep the oil off the crank shaft during heavy driving conditions. This pan retains the factory oil pump pickup. Pick up one today to make your Fox Body, SN-95, New Edge, or S197 Coyote swap easier!
Oil Pan Slosh Baffle
The baffling systems in Canton's oil pans are the result of extensive testing on all types of tracks and engine configurations. Slosh baffles control the oil in the sump and prevents oil sloshing away from the pickup during vehicle motion.
-Fits 1979-2010 Mustangs w/ 5.0 Coyote Motor
Purchased this for a Coyote swap into my 96 Cobra since it was theorized that no modifications were needed in order to fit long tube headers. This theory is proving true as the BBK Coyote swap long tubes do indeed clear the oil pan, though by only hundredths of an inch, so I will likely go ahead and notch the pan a bit.
As you can see in the photo, a bit of massage and dressing up was needed to get it bolted up to my new M50 crate engine. First, the opening into the oil sump had to be enlarged a bit and massaged with a few blows of the hammer in order for the oil tube to clear the pan. Also had to dress up around the notch, and all along the rear of the pan for the windage tray. This was not quite enough in the end and so a little work with the die grinder on the outer corners of the windage tray removed the interference.
Fits nicely in the car with its stock K member, with perhaps 1/8 inch clearance at its tightest to the rack.
Canton - Racing Products
The staff at Canton Racing Products are heavily involved in racing and high performance Ford Mustangs & SVT Lightnings.
So they know their product line has to be the utmost quality and offer a technological edge.
Their mission has never varied from the start, "To research, develop and manufacture the best quality products matched with the best possible service in the industry."
Performance, quality and the best technical support is what Canton Racing Products is all about. Pick up your quality performance Canton oil pan, oil pumps, and other oil system components at LatemodelRestoration.com!
my 90 mustang is mostly stock, 64,000 original miles on the 302c.i. 5.0 motor. no rust, interior is all original and clean, no rips, upgraded the throttle body and cold air intake, 130amp alternator, ...