This part ships for FREE via UPS Truck Freight shipping!
Brings In Cooler Air To Motor
Heat Extracting Hood
Approximately 42 Lbs
What's in the Box
(1) Set of New Squirters
2013-2014 Mustang Cervini Stalker Hood
This 2013-2014 Mustang Cervini's Stalker hood is a great way to add a custom look to your S197 while keeping heat out of your engine bay. The aggressive, ram air style hood brings in air over your engine and moves this hot air out of the rear heat extractor vents to help keep your motor cool. Heat soak can rob horsepower and cause serious motor damage. Pick up this hood today to get your Mustang looking great and running even better!
Ram Air & Heat Extraction
Ram air hoods are designed to bring in air through a scoop in the front of your hood. These hoods move air over your motor to keep it cooler and are sometime used in conjunction with an air intake system for additional power. Heat extractor hoods have vents on the rear of the hoods to let heat escape and lower under hood temperatures. This Stalker hood features both for a great combination that gives you the best performance available.
High Quality Construction
This hood is made from premium, hand laid fiberglass for a durable constructed hood that will last a lifetime. With a fully-finished underside liner, you get added strength and great looks for your engine bay. This Stalker hood features rear-screened air vents to extract heat for lower under hood temperatures. Comes ready to be primed and prepped for painting.
Hood Features and Dimensions
- Approximate weight - 42 Lbs*
- Smooth finished underside
- Installs to all factory locations and utilizes the factory hood latch bar
-Fits 2013-2014 Mustang GT/V6/GT500/Boss 302
- Weight of the hood is approximate. Due to the design, weight can vary slightly.
See what our customers have to say about this product! Check out customer reviews.
This hood is one of my favorite after market hoods, and at a great price too. I got it two days after being shipped and painted the same day. It took an hour to install because there were a couple things we had to modify to be able to fit. The windshield wiper fluid line had to be cut and the weather strip had to be taken off completely. There were holes made for the strip but they were way to small to snap in the clips. The middle hood scoop vent didnt come with a grill, so I would definitely purchase one. Overall it is a good hood for a good price, and definitely makes the car look a lot better.
Was this review helpful to you?
nice hood, not in the best shape
John R. on
Let me start by saying this is not lmr's fault at all. I needed the car done asap and when the hood arrived, it needed lots of work before being painted. The shop doing the work wanted 300 for the repairs, I asked them to do what they could for 120. the hood had bubbles, waves and little ripples in various spots. It still ha flaws but only I can really see them. I spoke with Jay and he said he will help me out on my next purchase but insisted next time to just bring it back. He helped me get the ram air kit to make it functional and helped me go through the product to make sure everything was there before I left. I normally dealt with am but lmr is my new aftermarket shop. Thanks again Jay.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
nice look but needed work done before being painted.
John R. on
It's a great looking hood, but I had to have the body shop get rid of bubbles, ripples, and waves in the hood. They said to fix it all was 300 so I said do the best they could for 120. I could have very well sent the hood back and spoke with a rep at lmr, but we needed the car done asap so I didn't want to wait for the exchange. Lmr did me right though and helped me on the cost of the ram air kit to make it functional. Just look the hood over before you start painting it. Lmr Will make it right.
Cervini's - Insist on the BEST, the difference is the FIT!
Danny Cervini created Cervinis Auto Designs in 1991 with the goal to strive for perfection. As he built up the company from the ground up, he quickly became known as the industry leader for high quality, aggressively styled hoods and body components. All Cervinis products are manufactured in the USA with materials purchased in the USA.
Latemodel Restoration Supply carries a complete line of Cervini's Auto Designs hoods, spoilers, bumper covers, ram air and body kits for your Mustang or Lightning. Cervini's Auto Designs state of the art facility, combined with the latest manufacturing techniques allow them to engineer the best quality products in the industry today. Get your Cervini's Mustang and Lightning exterior styling components at LatemodelRestoration.com.