Our call center is closing at 3pm today. Please direct all communications to email@example.com or submit a contact request online here.
No Trimming/Modifying Required
Functional Cold Air Scoop
What's in the Box
(1) Stalker 2 Hood
(2) Heat Extractor Vents
Cervinis Stalker 2 Hood
Replace the factory hood on your 1999-2004 Mustang with Cervinis' Stalker 2 hood! This hood features a functional ram air scoop that provides cold air to the engine bay as well as two functional heat extracting vents to remove hot air from the engine bay. This combination provides consistent power and performance for your New Edge! The functional ram air hood will give your Mustang an intimidating look that will be sure to turn heads driving down the street!
Cervinis is known for the best quality aftermarket hoods on the market. This hood is made in the USA at their New Jersey facility. Utilizing premium, hand-laid fiberglass; this hood is guaranteed to fit perfectly with no trimming or other modifications required. The underside is fully finished and ready for prep and paint. The Stalker 2 hood installs in all factory locations using the factory hinges and latching system.
-Fits 1999-2004 Mustang
Test fitment of this part is mandatory BEFORE painting. Neither LMR nor the product manufacturer are responsible for fitment issues after paint has been applied. Professional installation and painting is highly recommended.
First Hood No Good. But with the help of LMR receiving a new one
Antonio S. on
Shipping okay. Shipper says they didn't receive my number to call me so took a few extras days. Once i got the hood the bolt holes to line up with the stock hinges were off. Call Cervini, they emailed me to drill out hinges. Remind you it is to be 100% bolt on. Won't have worked with my chrome strut hood lift kit. Called LMR support and they handled it quickly and solved my problem with cervini asap. 5 star service. Waiting on new to arrive. Set the hood on just to see how it looked. I think looks great. Thanks again to LMR support
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Jonathan L. on
I have made many purchases from LMR over the years, and I had my eye on this hood since it was released on the website, well, I finally got it. First off, the box was damaged in corners, oh well, UPS probably did it. Second, the hood was perfectly intact as were the vents and hardware (3M tape, nuts to secure hood) Third, the hood's mounting process took some effort to get it into the OEM hinges, one side would meet up, the other took some wiggling and elbow grease, use a second person to help. Fourth, it fit perfect- the hood closed and latched to OEM hood release and secondary with no problems at all, and after all that wiggling to make the bolts fit the respective holes, it lined up, no large gap on one side or other. Fifth, the 3M tape sucked, actually didn't work at all. Now let me be clear, I didn't paint either vents nor hood, since I'm holding off on that until I repaint the car completely, but we cleaned the surfaces and it still didn't work, we used Gorilla glue instead with painters tape to hold it down (vents aren't curved like hood, so you need to secure them to cure. Sixth, it works, the hood scoop is functional, the vents are functional, no additional holes needed. Lastly, I would suggest stronger adhesive tape for vents in future, as well as a type of screen or mesh for the hood scoop to prevent bugs or flying critters from hitting the engine or belt as the alternator on the GT sits in plain view inside, so anything going in will hit it or belt. Minor things, but perfect none the less.
Long post but I highly recommend this hood as it works with OEM latch, hinges, and hood support rod.
Cervini's - Insist on the BEST, the difference is the FIT!
Danny Cervini created Cervinis Auto Designs in 1991 with the goal to strive for perfection. As he built up the company from the ground up, he quickly became known as the industry leader for high quality, aggressively styled hoods and body components. All Cervinis products are manufactured in the USA with materials purchased in the USA.
Latemodel Restoration Supply carries a complete line of Cervini's Auto Designs hoods, spoilers, bumper covers, ram air and body kits for your Mustang or Lightning. Cervini's Auto Designs state of the art facility, combined with the latest manufacturing techniques allow them to engineer the best quality products in the industry today. Get your Cervini's Mustang and Lightning exterior styling components at LatemodelRestoration.com.