Benefits
- Increased Front End Air Flow
- Saleen Inspired Styling
- Cervini Quality
Features
- Ready For Prep And Paint
- High Quality Urethane Construction
- Same Design As The Original Saleen Kit
What's in the Box
- (1) Front Air Dam
- (1) LH Side Skirt
- (1) RH Side Skirt
- (1) Rear Valance
- 3M Adhesive Tape
1987-1990 Mustang Cervini Saleen Style 4 Piece Body Kit
During the late '80s and early '90s, Fox Body Saleen Mustangs were all the rage. Well, now you too can add that classic Saleen styling to your own Mustang with this Cervini 4 Piece Saleen body kit. Cervini Auto Design is known for its quality craftsmanship and it shows in its motto, "Insist on the BEST, the difference is the FIT!" The 4 Piece Kit includes an air dam, rear valance, and side skirts. This kit installs with 3M brand 2-sided tape and screws into the inner fender wells. These kits are constructed of High-quality urethane and come ready for prep and paint.
SALEEN STYLE FRONT & REAR VALANCE
The front and rear valances are easily attached to your existing LX bumper cover with the included hardware, this Saleen-style air dam is a quick and easy upgrade. Not only does it improve the exterior appearance, but it also allows for more airflow into the radiator. With a larger front-end opening, more air is able to get through the bumper to keep your engine coolant temperature down. This Cervini air dam is made of high-quality urethane for a durable upgrade to your 1987-1990 Fox Body Mustang. This air dam attaches directly to your LX bumper with 3M double-sided tape and screws into the inside of your fender wells.
SALEEN STYLE SIDE SKIRTS
Add that classic Saleen styling to your own mustang with this Cervini's Auto Design Saleen Side Skirt kit. These side skirts install with 3M brand 2-sided tape and screws into the inner fender wells. Fits directly on your 1987-1990 Mustang LX and there is no disassembly required. These side skirts are constructed of High-quality urethane that will flex and is less prone to cracking than fiberglass.
Disclaimer
Test fitment and paint preparation of this part are mandatory BEFORE painting. Neither LMR nor the product manufacturer is responsible for fitment or finish issues after the paint has been applied. Professional preparation, installation, and painting are highly recommended.
On urethane and fiberglass body parts, due to the manufacturing process, it is common to see irregular surface patterns, sanding, buffing, and mold release marks on products. These marks are normal and will not be present once the product has been sanded, prepped, and painted to match your vehicle.
Cervini Warranty - Click Here
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
