Chemical Guys TORQ Foam Blaster 6 Foam Wash Gun
Turn every Ford Mustang and SVT Lightning car wash into a fun foam party with the TORQ Foam Blaster Foam Gun! Bored with the same car wash routine? Lack of suds and bubbles leaving your finish flat and tired? Add intense foam action to clean paint and add heaps of fun to the process! Improper car washing pushes dirt around and scratches paint. The TORQ Foam Blaster mixes slick car wash soap and foaming bubbles to help loosen, lubricate, and float abrasive dirt away from paintwork for a gentler and safer cleaning experience. For extra-sensitive paint finishes, spray the Foam Blaster directly into the wash mitt with every wipe to add extra lubrication. Spray down paintwork, wheels, undercarriages, exhaust systems, and even engine bays with soapy cleaning suds at the start of every car wash with the TORQ Foam Blaster Foam Gun!
Whether your car is really dirty, or only slightly dirty, the TORQ foam gun has a dial that allows you to adjust the dilution ratio of the soapy foam sprayed from the nozzle! The soap solution bottle holds 32 oz. of liquid. Fill with plain water, then add 1 - 3 oz. of your favorite Chemical Guys car wash soap to suit the level and type of dirt on the vehicle.
How To Use
-Fill soap solution bottle with fresh water.
-Add 1 - 3 oz of your favorite Chemical Guys car wash soap.
-Rinse car with water to remove loose debris and grime.
-Attach TORQ Foam Blaster Foam Gun to the quick release nozzle.
-Cover car with soapy car wash foam to lift and lubricate stuck-on dirt from the surface.
-Proceed with 2-bucket car wash method to gently remove any dirt without installing any swirls or scratches.
-Spray foam directly into wash mitt with every wipe for maximum lubrication.
-Rinse car clean and dry with premium microfiber towels.
Maintaining The TORQ Foam Blaster Foam Gun
-Rinse soap solution bottle clean with fresh water.
-Run plain water through the foam gun to purge detergent and soap from the internal components.
-Cycle with warm or hot water to break down thick soap residues
-Unscrew soap solution bottle and allow to air dry, then reattach before storing.
-Store the TORQ Foam Blaster Foam Gun in a cool dry place out of direct sunlight.