Get it by Christmas! Order by December 16, 2016 @ 3pm CT
Additional Bolstering & Support Over factory Seat
Lighter Weight Than Factory
Can Be Used With Both Factory Seat Belts & After-market Harness'
Wide Version For Additional Bolster Clearance
Compatible With 5 Point Harness
Injection Molded Foam Construction
Fixed Back Design
Defined Thigh, Kidney, & Shoulder Bolsters
Black Leather Anti-Wear Patches
Corbeau Name Embroidered
UV Inhibitors Added to Fabric
Fits Both RH/LH Sides
What's in the Box
(1) FX1 Racing Seat
(1) Corbeau Decal
Corbeau FX1 Wide
The FX1 Pro racing seat features composite fiberglass technology. The FX1 Pro racing seat comes in three different sizes, the FX1 Pro, FX1, and FX1 Wide. The FX1 Pro combines comfort, performance, and safety at an absolutely unbeatable price. Designed with an emphasis on comfort, this seat is one of the most comfortable race seats you will ever sit in. If you enjoy racing and want a practical and affordable shell seat, the FX1 Pro is a hard one to pass on. As a rule of thumb, the FX1 Pro racing seat will fit up to a 36 inch waist, the FX1 will fit up to a 38 inch waist and the FX1 Wide (black only) will fit up to a 42 inch waist. High wear patches are strategically placed to protect your seat from abuse in the high wear areas. The FX1 Pro racing seat is available in cloth fabric with leatherette high wear patches.
Ultimate lateral support with well-defined thigh, kidney, and shoulder bolsters will allow both the driver and passenger to remain in the optimal seating position. The reduction of body shifting will reduce the amount of driver fatigue and enhance the overall driving experience.
Seat Back Brace
This seat is equipped with a bolt on the back giving it the ability to be bolted to a seat back brace.
This seat has harness slots for 3, 4 and 5-point harness capability. A submarine slot is already installed for a 5th strap.
Anti-slip cloth materials, coupled with anti-wear patches. Contains UV inhibitors. This seat has been extensively tested under extreme conditions and found to be colorfast.
Aluminum Side Mounts
This seat can be bottom mounted or side mounted. Aluminum side mounts are available which allow the seat to be bolted right to the floor.
Fiberglass composite shell with a black gel coat.
Note - Using these seats in 2005+ Mustangs with side impact air bags will require you to disable the side air bag system. Because of that, we only recommend these seats be used in Mustangs NOT equipped with side impact air bags.
Note: Wide seats will only fit 79-93 Mustangs if no console is used. Will not fit with factory console
All Corbeau seats require proper seat tracks per designated year. These seats will not fit factory seat tracks. Proper Corbeau seats tracks will need to be purchased.
Nice Seat for the price, doesnt fit 88 foxbody well at all
Weston S. on
I like the seat, it has all the things I could ever need in a racing seat. I bought the wide version because I plan on becoming fat and wanted it to fit then, I am sure I could have gone with a regular though and been fine. This seat is VERY wide. Install was a snap onto the double locking sliders,but make sure to tighten the provided nuts on the bracket before install...
Problems... I have an 88 GT and these seats are too big for it. They not only push on the door panels, but also bend the center console so far in it looks like it will snap. Forget about moving them back and forth.
SO dont get the WIDE if you drive a fox and want a center console. They are just too big...
Was this review helpful to you?
Budget racing bucket
Andrew B. on
The seat looks and feels great. My issue was size, it's way too big. With 38-39" waist I drown in it. Think twice before going for Wide version, have learned my quite expensive lesson, shipping back is going to cost a fortune, 1/3 of the seat price. :( Will see if LMR and Corbeau can help out with that.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Great looking seat/ fitting seat.
BRYAN F. on
I bought this seat for my 1994 GT with a maximum Motorsports roll bar with swing out door bars, this seat will not clear the door bars and is very tight on the center console, it also touches the door panel slightly. The positive side is i found a race seat that fits me well.
Corbeau - Seats for Street Race and Off Road
LatemodelRestoration.com is proud to offer Corbeau Seats for your Mustang or Lightning.
Corbeau Seats and accessories continue to be the number one choice for motorsports enthusiasts everywhere. Corbeau's unmatched experience in research and design has led to the development of the highest quality and most technologically advanced line of seats available today.
With the latest styles, the largest selection, a limited lifetime warranty, and custom direct bolt-in mounting brackets, your choice is simple. Whether it's a street, race, or off-road application, you're sure to find the perfect seat for your vehicle and your budget. Shop LatemodelRestoration.com for your Corbeau racing seats!
Products by Vehicle
Email Me When It's Back In Stock!
Email Me When It Arrives!
Upload a Picture
Upload your own picture of the Mustang Corbeau FX1 Wide Seat Black Cloth
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LMR.com ® permission to use it in future advertisements and promotions.
I have been restoring my car for a long time. The engine is a 331 stroker afr 185 heads, trick flow r series intake, 1 3/4 in long tubes with flow master dumps. Sounds awesome and love it every ride. ...