Mustang EBC Redstuff Ceramic Brake Pads
Replace your worn out brake pads with this 2015-2018 Mustang GT Performance Pack EBC brake pad kit! EBC Redstuff front brake pads improve braking performance 15% over factory pads while reducing dust by 60-90%! These pads are capable of repeated heavy braking without brake "fall-off". EBC Redstuff brake pads feature a ceramic compound that is great for street driven Mustangs that see occasional spirited driving. This compound also causes minimal rotor damage throughout the use of the pad. A red "Brake-In" coating finalizes this pad for safe braking immediately after installation.
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their brake rotor.
-Fits 2015-2018 Mustang GT Performance Pack
EBC Brakes Warranty - Click Here
Bed-in / Burnishing Instructions:
1. After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH applying moderate pressure.
2. Make an additional 2-to-3 hard stops from approximately 40-45 MPH.
3. DO NOT DRAG BRAKES!
4. Allow at least 15 minutes for the brake system to cool down.
5. After step 4 is completed, your new brake pads are ready for use.