1979-1993 Mustang Flaming River Manual Steering Conversion kit
Flaming River made it easy to convert your 1979-1993 Fox Body Mustang to manual steering with this manual steering conversion kit. It eliminates the power rack, pump, pulley, and rag joint for a total vehicle weight reduction of more than 30 lbs off the front end of your Mustang. Flaming River eliminates the factory sloppy rag joint with its low-profile steering shaft assembly to help reduce play in the steering column for a more smooth and responsive steering feel. This rack utilizes a 20:1 ratio which may take a few more turns of the steering wheel to get the lock to lock if your car was originally equipped with a 15:1 steering ratio. These Flaming River manual rack conversions are ideal for road racing, drag racing as well as street-driven Mustangs where a very responsive steering system is wanted. Streamlining the engine compartment of your 1979-1993 Mustang by eliminating the power steering, you also reduce the parasitic loss for improved power due to less stress on the accessory drive. Completing the conversion Flaming River includes new thermoplastic rubber rack bushings to reduce NVH as well as new outer tie rods to get your Fox Body back on the road quickly.
After installation, LMR recommends having a professional alignment shop make sure the toe is properly set and also ensure that your steering wheel is aligned correctly.
SVE power steering pump delete kit to finish up your install