In observance of Memorial Day our business will be CLOSED Monday, May 29, 2017.
Reduced Body Roll
Reduced Wheel Hop
Black Powder Coated Finish
3-Piece Poly-Ball Bushings
What's in the Box
(2) Lower Control Arms
J&M Rear Lower Control Arms
Upgrade your rear suspension with these Mustang rear lower control arms from J&M! Beefing up the rear suspension of your 1999-2004 New Edge is a great way to improve grip, reduce wheel hop, reduce body roll, and overall get through the track faster! You can have all of the power in the world, but if you can't keep your rubber to the road, you aren't going anywhere. With a black powder coated finish, tubular steel construction, and a unique bind-free 3-Piece Poly-Ball bushing setup, these Mustang Control Arms are exactly what you need to get your car down the straightaway or cut through those tight corners faster than anyone on the track!
3-Piece Poly-Ball Bushings
The Poly-Ball bushing combination incorporates a very hard inner polyurethane ball which is surrounded by soft socket outer cups. This combination allows the bushing to articulate like a spherical bearing during cornering. The hard inner ball does not allow the bushing to deflect during acceleration giving you great traction during acceleration.
These control arms are equipped with spherical bushings on the axle side of the control arm. Due to additional NVH and binding caused by the spherical axle bearings, we recommend this kit to be used on predominately track & light street applications.
Will NOT fit Cobra with Independent Rear Suspension.
-Fits 1999-2004 Ford Mustang GT, V6 and Mach 1
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
Ford Mustang Upper & Lower Rear Control Arm Installation Instructions
Step 1: Start by lifting your car up on a lift, or jack stands
Step 2: Remove your rear wheels
Step 3: Start by removing the sway bar hardware, if equipped by removing the 2 bolts on each rear control arm
Step 4: Remove the sway bar f... more
J&M Products has been a world leader in the design and manufacturing of automotive suspension since 1996. Their products are built in our modern production facilities, years of research and a constant commitment to innovative technologies and manufacturing methods.
J&M Products' new product development is a result of our commitment to performance products that deliver results. Each new component must pass both quality and performance evaluations prior to a manufacturing commitment.
The flexible manufacturing process provides large volume production of specialty components for your Mustang or Lightning as well as accommodating the complexities of the small run direct-fit components. Their modern factory incorporates highly precision automated methods with the capabilities of holding a tolerance of + or - .0001 inches to insure product consistency at the highest quality levels and competitive pricing.
Shop LatemodelRestoration.com for your J&M caster camber plates, stainless steel brake lines, lower control arms, and other high quality Mustang components.