Get it by Christmas! Order by December 16, 2016 @ 3pm CT
Reduces Wheel Hop
Made In The USA
Red Powdercoated Finish
1.25” x 0.120” DOM Mild Steel Tubing
Adjustable While On The Car
What's in the Box
(1) Pair Adjustable Control Arms
Extreme Duty Control Arms
Looking to get rid of the wheel hop in your 2005-14 Mustang? J&M has come up with these extreme duty S197 control arms to do the job. These on car adjustable control arms are constructed of heavy duty 1.25"x 0.120" DOM mild steel tubing with a chrome-moly heat treated spherical rod end on each arm. This provides a bind-free experience while the suspension is under load. The body side of the car features grease able polyurethane bushings for a quiet comfortable operation. The rear end side of the arm features spherical rod ends for strength and durability. J&M is a quality suspension name you can trust for your S197 Mustang! Check out more of the features for these control arms below.
- 1.25” x 0.120” DOM Mild Steel Tubing
- High Strength Steel Threaded Tube Adaptor
- ¾” Hard Chrome Plated, Chrome-Moly Teflon/Kevlar Self Lubricating Race Rod End
- High Frequency Pulse Welded Construction with Rosette Welds on the Bung Side for Extra Strength
- CNC Machined Offset Step Bushings with Proper 14MM ID for use with Factory Bolt
- Adjustable While On The Car
- Energy Suspension Polyurethane Grease Able Bushings
- Designed for Proper Use of the OEM Hardware
- Installed Grease Fittings for on the Car Maintenance
- Red Powder Coating for a Great Looking Long Lasting Finish
- Improves Responsiveness and Control
- MADE IN THE USA!
-Fits 2005-14 Mustang
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
J&M Products has been a world leader in the design and manufacturing of automotive suspension since 1996. Their products are built in our modern production facilities, years of research and a constant commitment to innovative technologies and manufacturing methods.
J&M Products' new product development is a result of our commitment to performance products that deliver results. Each new component must pass both quality and performance evaluations prior to a manufacturing commitment.
The flexible manufacturing process provides large volume production of specialty components for your Mustang or Lightning as well as accommodating the complexities of the small run direct-fit components. Their modern factory incorporates highly precision automated methods with the capabilities of holding a tolerance of + or - .0001 inches to insure product consistency at the highest quality levels and competitive pricing.
Shop LatemodelRestoration.com for your J&M caster camber plates, stainless steel brake lines, lower control arms, and other high quality Mustang components.
I have been restoring my car for a long time. The engine is a 331 stroker afr 185 heads, trick flow r series intake, 1 3/4 in long tubes with flow master dumps. Sounds awesome and love it every ride. ...