2015-2017 Mustang KW V1 Coilover Kit
Bolt on better performance and better exterior appearance with the KW V1 coil over kit from LMR. The V1 coilover kit is designed as an bolt on suspension kit that will allow height adjustment to suit your needs. The V1 coilover setup is pre-set by the professionals at KW to provide a balance of sporty driving, comfort and safety.
The struts provided with this kit are non-adjustable. They were extensively tested by KW to be valved for the best balance of handling and comfort. This coilover kit will reduce body roll, and improve steering response in your 2015-2016 Mustang.
Suspension Height Adjustment
- Front Lowering: 1.2" to 2.0"
- Rear Lowering: 0.8" to 1.5"
Finally got this installed this past weekend, install was pretty straight forward, this kit does not come with strut mounts! If you have the performance package, use the original factory mounts since they are of a better quality than the non pp mustangs, if you have a non pp mustang, do yourself the favor and get the higher quality ford performance strut mounts, if you wish to get that crazy camber setup, get a camber plate but it isn't required to get perfect alignment since after I installed the kw setup, I performed the alignment myself. And again, kw makes one of the best suspension parts out there in the market!
KW coilovers are used by some of the most recognized names in the racing scene. KW has now set up coilover kits ranging from mild to wild for all 79-current Mustang. Turn your Mustang into a corner carving monster with KW Coilovers!
I now have a new 5.0 L 302CID 434 bhp GT. I have installed Flowmaster Mufflers, a K&N Air Filter and a full frontal Clear Bra. I had a 2012 V6 which was featured here on the LMR "Submit My Ride" pag...