Single 70mm Mustang Turbo Kit
The On3 Performance Turbo Kit for 2005-2010 Mustang GT 4.6L features a single 70mm Turbo with an Intercooler. This Mustang turbo kit is capable of 380 to 700 horsepower (with proper supporting modifications)! The kit utilizes the factory exhaust manifolds and all tubing is 304 stainless steel. Boost is controlled by a 38mm Wastegate and pressure relief is handled by a 50mm Blow-off Valve. All needed hoses, lines, couplers, clamps, brackets, and hardware are included.
What's In The Box
-On3 Performance 70mm Turbocharger - journal bearing, .70ar Compressor, 70mm Inducer T-4 flanged, 3" Outlet
-On3 Performance laser cut turbo support bracket
-2.5” bar and plate intercooler
-On3 Performance 38mm wastegate
-On3 Performance 50mm blowoff valve
-On 3 Performance Oil Filter Relocation Kit
-Oil feed Billet fittings
-Oil drain kit with all Billet fittings
-On3 Performance laser cut turbo support bracket, sway bar relocation bracket, a power steering reservoir relocation bracket, intercooler mounting brackets
-8mm stainless steel V-band clamps
-304 stainless steel hot side piping
-304 stainless steel cold side piping
-Air filter not included
While this Mustang On3 turbo kit is designed to be a bolt on, it is not a direct fit. Some modifications and relocation will be required, such as cutting and clearancing to fit the intercooler and tubing, as well as minor dimpling of the tubing to clear chassis components, and tapping an oil return in the oil pan with the included billet fitting. You will need to upgrade your fuel system; a high flow fuel pump, injectors, and MAF will be required. Custom Tuning will be required! The power steering reservoir and front sway bar need to be relocated using the supplied brackets.
-Fits 2005-2009 Mustang GT
This product is intended for off-road use only, and is not legal for use in emission restrictive states. Off-Road Disclaimer
Product Component Note
- On3 no longer includes a manual boost controller. You must provide / source your own. HPS-TBOOST is something we can recommend.
- On3 no longer includes a power steering cooler line. If you are to retain power steering, custom fabrication will be required.
With the addition of a nitrous, turbo, or supercharger kit; custom tuning will be required for your car to run properly and safe.
On 3 Performance Warranty - Click Here
See what our customers have to say about this product!
Check out customer reviews.