Get it by Christmas! Order by December 16, 2016 @ 3pm CT
4130 Chromoly Steel
On Car Adjustment
What's in the Box
(1) Double Adjustable Panhard Bar
Increased Handling Performance
Keep the rear end of your 2005-2014 Mustang centered after lowering your S197 with this Team Z double adjustable panhard bar. This bar is responsible keeps the rear axle located in the optimum position under the rear of the car, dramatically improving cornering and overall handling. You can easily fine tune your suspension with the Panhard bar installed on your mustang just by turning a wrench, no need to remove it to make adjustments.
Team Z Design
Team Z Motorsports and Ford Racing co-developed the suspension for the FR500C Grand Am Mustang and the NHRA Cobra Jet Mustang. Rest assured that when installing Team Z suspension components that you have some of the best parts for your Mustang!
High Quality Construction
This Team Z adjustable panhard bar is made from 1-1/8th" 4130 Chromoly steel tubing for a sturdy and lightweight design. It features energy suspension bushings, hardened jam nuts, and Tig welded connections for a reliable setup on your S197 suspension
By nature, a Mustang panhard bar will alter rear end position as ride height changes. This makes it necessary to use an adjustable panhard bar when lowering your vehicle as it allows you to re-center the rear end. Adjustable panhard bars also become a "must-have" part if you are trying to fit the widest tires possible in the wheel well.
Fits 2005-2014 Mustangs
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
Jack and jack stands
18mm wrench or socket
Wrenches for adjustable panhard rods: 1”, 1-1/16”, 1-1/4”
Step 1:Lift vehicle and support with jack stands under the rear end.
Step 2:Using an 18mm wrench or socket, remove both panhard rod bol... more
Team Z motorsports has researched and developed a variety of different Mustang suspension components to have your vehicle handling, cornering, and performing better than ever. Choose from Team Z tubular k-members, drag springs, anti roll bars, control arms, bumpsteer kits, panhard bars, and many more suspension components for your Mustang. These parts have been built and tested by Team Z for maximum performance on and off the track.
I have been restoring my car for a long time. The engine is a 331 stroker afr 185 heads, trick flow r series intake, 1 3/4 in long tubes with flow master dumps. Sounds awesome and love it every ride. ...