Due to high order volume, please allow an additional 1-2 days for shipping. Thank you for your patience.
Door panels for your Fox body Mustang are finally available. Kits include two door panels wrapped in vinyl material. To ease installation, don't forget to order our door panel installation kit.
Mustang Door Panel Construction
These door panels are made from 1/8" high-density-fiberboard (hardboard) covered with factory style vinyl with a layer of cotton padding and paper moisture barrier in between. The hardboard is precision cut for a perfect fit in your Mustang.
Optional Components Installation
The design of this door panel is such that non-required components can be installed AT WILL. For instance, if you don't want to install the worn out map pockets from your old door panels, you don't have to! The vinyl covering is solid, with no cut outs so leaving off the map pockets or even the door speakers is perfectly OK!
Are These Mustang Door Panels Right For You? Question 1: Does your Mustang have an existing set of door panels? If your Mustang does not already have door panels these door panels are NOT for you. Almost every piece of the old Mustang door panel with the exception of the board and the vinyl will need to be re-used. If your Mustang does not have door panels you should look into a set of our "deluxe" door panels.
Question 2: Do you consider yourself a do-it-yourselfer OR do you have a local upholstery shop that you can do the installation for you? When you purchase these door panels assembly IS required and if you don't feel comfortable doing the installation yourself you should find a local upholstery shop that can handle this type of work.
If you said yes to these two questions you are the perfect candidate for this set of Mustang door panels!
- Will not fit Mustangs with manual windows
- Does not include: speaker grilles, door belt weatherstrip, door handle bezels, or lock knob grommet
- Door panels are shipped without holes cut in the vinyl for the arm rest, window regulator, switches or door handle. Precut holes are cut into the backer board for these accessories. When cutting the vinyl, remove as little vinyl material as needed to gain the proper clearance on the door itself. Cutting the vinyl to match the holes in the backing board can result unsatisfactory finish. Pictures are for reference only.