Differentiate your S650 Mustang apart from the rest with this premium Anchor Room smoked rear side marker lights tint for 2024 Mustangs! From the factory, the lights on your Mustang are a generic red color and leave much to be desired when it comes to the exterior appearance. Anchor Room's superior solution to this common issue is its high-quality vinyl tint kit. Pre-cut for a precision fit every time, Anchor Room's vinyl is three mils thick for a sleek, smoked look that lasts. This smoked rear side marker light tint kit makes for a direct installation that can easily be applied or removed at any time. Simply squeegee them over your factory's rear side marker lights with soapy water to give your Mustang the dark look you have been looking for!
Utilizing computer-cut proprietary templates, this smoked rear side marker light tint will guarantee a perfect fit every single time. Pre-cut for a precision fit every time, Anchor Room's vinyl is 3 millimeters thick for a sleek, smoked look that lasts. Anchor Room utilizes only the highest quality vinyl available on the market as they stand behind their product with a 6-year warranty for the ultimate peace of mind!
Anchor room was established in 2009 and proudly provides only American made parts. Their core principals of integrity, unique quality products, top customer service, and a no hassle guarantee has made them one of the top producers of specialty sport car accessories.
The wheel size is the diameter of the wheel, in inches, not counting the tire.
Modern tires in North America have several other measurements associated with their size.
A tire designated as a "225/70R14" denotes a tire with the following dimensions: width of tread: 225 mm; ratio of tire height to width: 70 percent; rim diameter: 14".
Therefore a 185/70R14 has the same rim diameter and aspect ratio, but a smaller overall diameter and narrower tread face than the 225/70R14.
The easiest way to measure backspace is to lay the wheel face down onto the ground so the backside of the wheel is facing up.
Take a straight edge and lay it diagonally across the inboard flange of the wheel. Take a tape measure and measure the distance from where the straight edge contacts the inboard flange to the hub mounting pad of the wheel. This measurement is the backspace.
The photo below shows three wheels with 2", 3", & 4" backspace.
Wheel Bolt Pattern
The bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4, 5, 6, or 8 lug holes. A bolt circle of 4x100 would indicate a 4 lug pattern on a circle with a diameter of 100mm.
The diagram indicates the proper measuring methods. 6 lug wheels are measured like the 4 lug wheels.
The offset, measured in millimeters, can be negative or positive, and is the distance from the hub-mounting surface to the rim's true centerline. A positive offset means the hub-mounting surface is closer to the outside edge of the wheel; a negative offset means the hub-mounting surface is closer to the inside edge of the wheel. Offset affects the scrub radius of the steering and it is advisable to stay within the limits allowed by the vehicle manufacturer. If tires are fitted which are significantly wider than those specified by the manufacturer, a compromise may have to be adopted whereby a wheel with less offset is used to prevent the tire rubbing on the suspension.
The centerbore of the wheel is the opening in the middle of the wheel, surrounded by the lug holes. This opening helps to center the wheel to the hub. Its diameter is typically measured in millimeters (mm) and varies in size depending on vehicle application. Manufacturers approve up to a 1% variance in tolerance to pass wheels during inspection.