1984-1989 Mustang Steering Wheel
If you are looking to give your 1984-1989 Mustang a race inspired look, or just want to replace a worn out steering wheel, this steering wheel is the solution. Featuring a brushed aluminum center, a perforated leather outer wheel, and a Pony logo horn button, this steering wheel gives you great functionality while adding an aggressive look to your interior. This kit includes the steering wheel assembly, hub, and all of the necessary hardware for you to get it installed. The steering wheel diameter is 14 inches.
The connector on the adapter hub must be cut off to wire up the supplied horn button. The terminal on the center of the supplied horn button needs to be spliced to the red wire on the adapter hub. The remaining terminal on the supplied horn button needs to go to the black wire on the adapter hub. The remaining yellow wire needs to be capped off.
A bit costly but hey it does add style points. Easy to install. Your hand won't slip when turning. A great buy
Yes, I would recommend this item to a friend!
Was this review helpful to you?
RICHARD J. on
Ordered several weeks ago with hub adapter and pony horn button, 1) hub adapter had to be hand worked to fit onto steering column ID and flats, hub adapter ID was to small. 2) hub adapter came with a 3 wire prong and would not connect to any wiring on horn button, had to cut 3 wire prong and determine the 2 wires needed for the horn connection, wires provided with horn button did not fit had to purchase the correct electrical connectors and connect to 2 wires from 3 wire prong for horn to work. everything works and looks great, with an older fox body you may need to do modifications for your ride. Team LMR was helpful thru the process for the wiring issues.