Coyote & Voodoo Engine Lift Plate
If you are looking for an easy way to lift, store, install or remove your Coyote or Voodoo engine, this engine lift plate will make your life a lot easier. This plate is designed to be bolted to the cylinder heads to provide a solid lifting point for a 5.0L Coyote or 5.2L Voodoo engine. No more using bolts sticking out of the block or head that could potentially break. This lift plate provides a safer way to lift your engine without the risk of broken bolts!
Multiple Lift Points
The lift plate is designed with 5 different holes so that you can lift your engine with or without a transmission attached to the engine. The 5 different holes allow you to balance the engine for the perfect installation angle.
This engine plate can be used for multiple purposes. Not only will this plate provide a solid way to lift your engine, you may also leave it mounted to your engine to provide a seal to prevent foreign objects from entering your engine. You may add a factory gasket under the plate and bolt it down to provide the ultimate storage protection.
-Fits Gen 1 and Gen 2 5.0L Coyote
-Fits 5.2L Voodoo engine