Mustang Front & Rear Alignment Kit
Improve handling and prevent tire wear on your S550 with this 2015-2018 Mustang alignment kit from J&M Products! This kit includes everything you need to align the front and rear of your S550. The front caster/camber plates are great for realigning your front suspension after lowering, while the rear kit solves a problem from the factory of subframe misalignment.
J&M Caster/Camber Plates
If you've installed lowering springs, you'll want to install these plates to correct the front suspension geometry. Leaving your camber out of specifications can lead to uneven tread wear and less tire contact patch. The Mustang J&M Camber plates will allow you to properly adjust your caster and camber. All adjustments to caster and camber are easily adjusted individually at the top of the strut tower. These plates feature spherical bearing that prevents unwanted defection and precisely locates the strut shaft during cornering. These unit come completely assembled and bolt in with out additional drilling or cutting to your Mustang.
J&M Rear Alignment Kit
The factory IRS subframe mounting holes are much larger than the bolts holding it in. This leads to the crossmember and rear alignment being off as much as .5150 from side to side. J&M designed this kit to fill that gap and eliminate any side to side movement in the subframe. The J&M rear alignment kit is constructed with CNC machined 6061 billet aluminum for maximum strength, durability, and a precision fit. The bushings are then anodized to Mil A 8625 Type 2 specification for a clear, corrosion resistant coating. This kit simply slides right into these mounting holes and reuses the factory hardware for a quick and easy installation.
J&M Products has been a world leader in the design and manufacturing of automotive suspension since 1996. Their products are built in our modern production facilities, years of research and a constant commitment to innovative technologies and manufacturing methods.
J&M Products' new product development is a result of our commitment to performance products that deliver results. Each new component must pass both quality and performance evaluations prior to a manufacturing commitment.
The flexible manufacturing process provides large volume production of specialty components for your Mustang or Lightning as well as accommodating the complexities of the small run direct-fit components. Their modern factory incorporates highly precision automated methods with the capabilities of holding a tolerance of + or - .0001 inches to insure product consistency at the highest quality levels and competitive pricing.
Shop LatemodelRestoration.com for your J&M caster camber plates, stainless steel brake lines, lower control arms, and other high quality Mustang components.