DCR Front of Quarter Panel GT Molding
Restore the exterior of your Fox Mustang with this 1985-1986 Mustang GT front of quarter panel molding! This molding usually shrank due to exposure to the elements or became wrinkled and was unable to be straightened back out due to the metal banding that was inside from the factory. Daniel Carpenter Reproductions offers this replacement passenger side front of quarter panel molding that replaces your factory molding to properly restore the look of your GT back to showroom new.
Daniel Carpenter Quality
This front of quarter panel molding is built with molded urethane and infused with a metal strip to provide added strength. The new molding has the specific recessed C-channel for the accent stripe at the very front. The front of the molding has a straight edge to match up with the rear of the door molding, while the rear of the molding has a curved edge that matches the shape of the quarter panel wheel opening. 3M double-sided tape is pre-installed on the back of the molding to secure the molding in place after prep and paint.
Due to the manufacturing process, this molding must be sanded, prepped, and painted to match your Fox Body before installation.
Fits 1985-86 Mustang GT
Test fitment of this part is mandatory BEFORE painting. Neither LMR nor the product manufacturer is responsible for fitment issues after the paint has been applied. Professional installation and painting are highly recommended.
Mustang Body Molding Removal/Install - Fox Body LX GT Cobra
Fox Body Mustang GT Quarter Panel Moldings (85-86)
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2013-06-11 Are your Mustang side body moldings peeling away from your Mustang or looking a little wavy? Worse yet are you missing pieces of our Mustang body side moldings? If so, no worries. Here at LatemodelRestoration.com we have plenty of Mustang Body Moldings to get your Fox Body Mustang looking great in no time. We carry body moldings for LX, GT and Cobra models ranging from 1985-93 year ranges.
Watch the video and follow along as Jmac walks you through installing a set of body moldings on a LX Fox Body Mustang Coupe. Jmac goes through the process of removing your old moldings and the how to remove the adhesive left behind on the Mustang. So whether your are doing an installation or just need help on removing your FoxBody Mustang Body Moldings here at Latemodel Restoration we have you covered with plenty of Mustang tech.
Get your Project FoxBody Mustang performing and looking great LatemodelRestoration.com's 5.0Resto and SVE brand Mustang Restoration Parts.
Published on 2020-05-04 Buy 85-86 Body Molding: https://latemodelres.to/85-86bodymolding Buy 10-Piece Body Molding Kit (85-86): https://latemodelres.to/8586GTM-K
How to remove and install 1979-1993 molding: https://www.youtube.com/watch?v=QyZFI0N4L90
1985-1986 Mustang 5.0 Resto GT Body Side Molding Kit Complete the exterior restoration of your Fox Body the right way with this 1985-1986 Mustang GT body side molding kit from 5.0 Resto! These moldings run along each side of the body and attach to the fenders, doors, and quarter panels. The best way to get a quality paint job is to take off these moldings to get proper paint coverage throughout. These moldings are usually worn from exterior elements and often don't survive the removal process. 5.0 Resto compiled this complete GT body molding kit to properly restore the look of your GT back to showroom new.
High Quality Construction Compiled in this kit is every molding needed to replace your factory body side moldings. The rear of fender moldings, door moldings, and front of quarter panel moldings are built with a molded urethane that provides added strength so the factory metal bands are no longer needed. These moldings have 3M double-sided tape pre-installed on the back of the molding to secure the molding in place after prep and paint. The front of fender and rear of quarter panel moldings are built with a molded plastic construction. These moldings have integrated plastic studs on the backside that secure the molding to the fender and quarter panel with the included pal nuts. Each molding has the GT specific recessed C-channel for the accent stripe running from the front of the molding to the rear. You won't find a better kit to restore the original styling of your GT Fox Body!
5.0 Resto Solutions 5.0 Resto is dedicated to the preservation of the Fox Body by providing solution-based products and content to help you restore your Mustang. This kit was compiled to replace all of your body side moldings to ensure your LX is restored to its factory condition. Be sure to check out 5.0 Resto's installation video and article below to help with the installation of these moldings.
Molding Note Due to the manufacturing process, scuff marks may be apparent. These marks must be sanded and prepped before painting and installation.
Due to factors beyond the control of LMR.com, we cannot guarantee against the improper use or unauthorized modifications of this information. LMR.com assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. LMR.com recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of LMR.com, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not LMR.com.
Daniel Carpenter Reproductions has been a trusted name in the Mustang community and known for producing high-quality products with factory fit and finish. Many of their products are made with Ford original tooling and manufactured in the USA while others are built to OEM specs and are an exact reproduction of the original. With a wide variety of restoration products ranging from exterior weatherstrip to interior trim, Daniel Carpenter Reproductions has the products you need to properly restore your Mustang. Shop our selection of Mustang Daniel Carpenter Reproductions products here at LMR.com!