351 Swap Turbo Kit
The On 3 Performance Turbo Kit for 1986-1993 Fox Mustang with 5.8L swap features a single 70mm Turbo with intercooler. This kit is capable of 400 to 800 horsepower(with proper supporting modifications)! Headers and crossover tubing are high temp black coated mild steel, while the rest is 304 stainless steel. Boost is controlled by a 44mm Wastegate and pressure relief is handled by a 50mm Blow-off Valve. All needed hoses, lines, couplers, clamps, brackets, and hardware are included.
What's In The Box
-On3 Performance turbocharger .70ar Coldside, .96ar Hotside, and T-4 flanged journal bearing
-3” 304 Stainless Steel Downpipe
-304 stainless steel dump tube
-3” bar and plate intercooler
-On3 Performance 44mm V-banded wastegate
-On3 Performance 50mm blowoff valve
-304 Stainless steel power steering cooler line
-On3 Performance manual boost controller
-Oil feed kit fittings – stainless braided feed line
-Oil drain kit with all fittings
-Alternator relocation bracket kit
-8mm stainless steel V-band clamps
-Turbo Headers and crossover tubing constructed of mild steel/black rust prevention coating
-The y-pipe to connect the downpipe to the catback is not included.
-Air filter not included.
While this kit is designed to be a bolt on, it is not a direct fit. The alternator will need to be relocated with the included bracket. Some modifications will be required! Such as cutting and clearancing to fit the intercooler and tubing, minor dimpling of the tubing to clear chassis components, tapping an oil return in the oil pan, etc. You will need to upgrade your fuel system; a high flow fuel pump and injectors will be required along with a properly calibrated MAF. Custom tuning will be required! 1986-1988 Mustang will require a Mass Air Conversion. All 86-93 5.8s will require an oil Filter Relocation Kit!
What is a Turbocharger?
A Turbocharger, or Turbo, is powered by your engines exhaust flow. Exhaust from the engine spins the Turbine which is connected to the compressor. The compressor draws in filtered ambient air, compresses it and feeds it to the engine. The amount of pressure above atmospheric pressure is referred to as boost. Turbo systems are generally referred to as being very efficient power producers and offer stock like driveability with significant power increase potential.
On3 Performance offers affordable, high quality turbocharger kits for all latemodel Mustangs. Each single and twin turbo kit is specifically designed to fit perfectly in your Foxbody, SN95, New Edge, and S197 Mustang. These power adders can boost your 4.6L or 5.0L motor to over 100+ additional horsepower. Featuring a simple bolt on installation, you can get the edge over your competition in one weekend! Shop On3 Performance turbo kits at LatemodelRestoration.com.
Products by Vehicle
Email Me When It's Back In Stock!
Email Me When It Arrives!
Upload a Picture
Upload your own picture of the Mustang On 3 Performance 351 Swap Turbo Kit (86-93) 5.8
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LMR.com ® permission to use it in future advertisements and promotions.