1990-93 Ford Mustang Front LED Conversion Kit - Fox Body

Mustang Front LED Conversion Kit (90-93)


We no longer carry the 1990-93 Ford Mustang Front LED Conversion Kit - Fox Body.
Check out 1979-1993 Mustang HID/LED Lighting for an updated selection.
Details   |  Description   |  Videos   |  Reviews
  • Mustang Front LED Conversion Kit (90-93)
Mustang Front LED Conversion Kit (90-93)

Update your 1990-93 Mustang light bulbs with this front LED bulb conversion!

Item #LRS-9093LED-F

Everyday Low Price: $69.99


FREE SHIPPING!
This item is not returnable once purchased
Please refer to our Return Policy policy for more information.

We no longer carry the 1990-93 Ford Mustang Front LED Conversion Kit - Fox Body.
Check out 1979-1993 Mustang HID/LED Lighting for an updated selection.

Get it by Christmas! Order by December 16, 2016 @ 3pm CT


Product Description

LED Conversion
LED bulb technology is taking the automotive world by storm! We're proud to offer this 1990-93 Mustang front LED bulb conversion. Upgrading your factory bulbs to LED bulbs will make sure you're seen day or night. Mustang LED bulbs put off pure white light for a modern look instead of the dingy lights that come from the factory. This ensures you are seen day or night without blinding the vehicles in front of you. These bulbs have excellent heat dissipation, so you do not have to worry about melting or burning your lens. Kit includes front sidemarkers and front park lights. Headlights are separate.

Included Bulbs/Locations
-3157 White x2 Brake Lights
-3156 White x2 Reverse Lights

Turn Signal Resistors
When installing exterior LED bulbs on your 1987-93 Mustang, load resistors must be used on the turn signal bulbs for them to properly flash. The resistance of LED bulbs is much less than with a standard bulb. As a result, your turn signal will “hyper flash” or blink at a very excessive rate similar to when a bulb is blown. The solution is to install a load resistor to simulate the resistance of a factory bulb. Due to variations of wiring harnesses used over the span of these vehicles, we recommend use of a volt meter or test light to determine which wires are the +positive and –negative.

Installation
Depending on what vehicle you are working on, there will be two types of bulb connectors you will be presented with. The most common will be a simple 2 wire plug with a positive and negative wire. This is very straight forward as you need to simply use the provided wire taps to connect one end of the resistor to the positive, and one end of the resistor to the negative. The other type of connector you will find is a 3 wire style connector. For this, we recommend using a volt meter or test light to verify which wire is positive and which is negative. Once these are determined, the same process applies. Simply connect one end to the positive and one end to the negative with the supplied wire taps. This process is done on both the left hand and right hand side of the vehicle.

Application
-Fits 1990-93 Mustang

Product Videos

Fox Body Mustang Exterior LED Conversion Review & Install (87-93 GT/LX)

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!


Product Reviews (2)

4.5 star rating
4.5 out of 5 stars - based on 2 reviews
4 Stars   Not flashing.
By on 2/25/2015
The flasher relay on my 1990 LX was on the passenger side behind the radio and is light blue. Make sure you install the flasher first other wise the bulbs won't work (at least that's how it worked for me) however they still do not flash when the turn signal is used. They do work as hazard flashers, just not turn signals not quite sure why this problem is happening. I am only running the front conversion kit and have not gotten them for the back yet. What can I be overlooking? Well anyways the product is a very good quality and are nice and bright! Once I figure out what the turn signal problem is I will recommend this to anyone interested in upgrading the lighting system with out fear of melting those expensive plastic one piece headlights!

Yes, I would recommend this item to a friend!


Was this review helpful to you?

5 Stars   Great customer support!
By on 3/2/2015
I purchased this kit before they added in the resistors which fixed the problem i've been experiencing, and they called me and told me they now include the resistors with thekit, and they sent me out a pair free of charge!

Yes, I would recommend this item to a friend!


Was this review helpful to you?

Vehicle Applications

Ford Mustang - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)


Products by Vehicle