1990-93 Mustang Rear LED Conversion Kit

We no longer carry the 1990-93 Mustang Rear LED Conversion Kit.
Details   |  Description   |  Videos
  • Mustang Rear LED Conversion Kit (90-93)
Mustang Rear LED Conversion Kit (90-93)

Update your 1990-93 Mustang rear lighting with this rear LED bulb conversion kit!

Item #LRS-9093LED-R

Everyday Low Price: $139.99

We no longer carry the 1990-93 Mustang Rear LED Conversion Kit.

Product Description

LED Conversion
LED bulb technology is taking the automotive world by storm! We're proud to offer this 1990-93 Mustang rear LED bulb conversion. Upgrading your factory bulbs to LED bulbs will make sure you're seen when you tap the brakes. Mustang LED bulbs put off a pure, focused light instead of the dingy lights that come from the factory. This ensures you are seen day or night without blinding the vehicles behind you. These bulbs have excellent heat dissipation, so you do not have to worry about melting or burning your lens.

Included Bulbs/Locations
-194led x2 Third brake light on LX & GT
-194led x2 Rear side markers
-1157 Amber x2 Rear turn signals
-3157 White x2 Brake Lights
-3156 White x2 Reverse Lights

Turn Signal Resistors
When installing exterior LED bulbs on your 1987-93 Mustang, load resistors must be used on the turn signal bulbs for them to properly flash. The resistance of LED bulbs is much less than with a standard bulb. As a result, your turn signal will “hyper flash” or blink at a very excessive rate similar to when a bulb is blown. The solution is to install a load resistor to simulate the resistance of a factory bulb. Due to variations of wiring harnesses used over the span of these vehicles, we recommend use of a volt meter or test light to determine which wires are the +positive and –negative.

Depending on what vehicle you are working on, there will be two types of bulb connectors you will be presented with. The most common will be a simple 2 wire plug with a positive and negative wire. This is very straight forward as you need to simply use the provided wire taps to connect one end of the resistor to the positive, and one end of the resistor to the negative. The other type of connector you will find is a 3 wire style connector. For this, we recommend using a volt meter or test light to verify which wire is positive and which is negative. Once these are determined, the same process applies. Simply connect one end to the positive and one end to the negative with the supplied wire taps. This process is done on both the left hand and right hand side of the vehicle.

-Fits 1990-93 Mustang

Product Videos

Fox Body Mustang Exterior LED Conversion Review & Install (87-93 GT/LX)

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

Customer Photos (0)

Vehicle Applications

Ford Mustang - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)

Products by Vehicle