2005-17 Mustang PMAS HPX MAF & 3" Blow-Thru Housing by PMAS

Details   |  Videos   |  Reviews

Details   |   Videos   |   Reviews
2005-17 Mustang PMAS  HPX MAF & 3" Blow-Thru Housing
2005-17 Mustang PMAS  HPX MAF & 3" Blow-Thru Housing
2005-17 Mustang PMAS  HPX MAF & 3" Blow-Thru Housing
2005-17 Mustang PMAS  HPX MAF & 3" Blow-Thru Housing
2005-17 Mustang PMAS  HPX MAF & 3" Blow-Thru Housing
2005-17 Mustang PMAS  HPX MAF & 3" Blow-Thru Housing
How To Clean The Mass Air Flow Sensor On Your Mustang

Increase performance, and support up to 800 horsepower, with this 2005-2017 Mustang PMAS HPX blow thru MAF and housing!


Everyday Low Price: $236.83

In Stock
 This item is returnable. Details

Free Shipping over $99

 Add to Cart

This product cannot be sold or shipped to the state of California. More Details
× close


  • Supports 800 Horsepower
  • Updated Sensor Curve Maintains Perfect Idle
  • Designed For Boosted Engines
  • Improved Throttle Response


  • 3" Diameter Tubing
  • T-6061 Billet Aluminum Construction
  • Universal MAF Pigtail
  • Limited Lifetime Warranty

 What's in the Box

  • (1) Blow-Thru Housing
  • (1) HPX Mass Air Sensor
  • (1) Universal MAF Pigtail

PMAS HPX Mass Air Flow Sensor & 3" Housing
If you are looking to convert your turbocharged, or supercharged, Mustang to the best mass air sensor setup on the market, look no further than this PMAS blow-thru setup! Blow-thru setups allow your post-compressor, compressed intake air to be measured, instead of the pre-charged air. After your turbo, or supercharger, compresses the air; the density, temperature, and pressure can be drastically changed compared to before it is compressed. Placing the mass air flow sensor in the path of the compressed air allows your tuner to tune true variables in the compressed intake tract!

PMAS HPX Mass Air Flow Sensor
The PMAS HPX MAF sensor is designed similar to the fast reacting, 2005+ style slot sensors. PMAS' HPX mass air sensor will support up to 800 horsepower in the included 3" MAF tube. This is not the limit of the HPX sensor, however. If you change your engine setup, and max out the 3" tube, it can be placed in a larger MAF housing, allowing it to support even more horsepower. This design gives you room to grow, making it the last sensor you ever have to buy!

PMAS 3" MAF Housing
PMAS 3" MAF housings are designed, and manufactured, in an optimized length to smooth incoming airflow. Smoothing the turbulent airflow provides a better reading for the mass air flow sensor. Constructed with T-6061 billet aluminum, and coated with a protective finish, this housing is built to perform and look great for a long time. Each end of the housing has stepped ends for a secure connection, preventing your hoses from being blown off under pressure.

Application Notes
-2005-2017 Mustangs will use the factory electrical connection. Universal MAF wiring included with this part will be discarded.
-Computer tuning is required when changing mass air flow sensors on your Mustang.
-Horsepower rating is approximate and will vary vehicle to vehicle.

-Fits 2005-2010 Mustang 4.6
-Fits 2011-2017 Mustang 5.0

This product is intended for off-road use only, and is not legal for use in emission restrictive states. Off-Road Disclaimer

PMAS Warranty - Click Here

  • Ford Mustang - 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

How To Clean The Mass Air Flow Sensor On Your Mustang

Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!

California Residents:
Prop 65 Warning SignWARNING: Cancer and Reproductive Harm-

About This Brand

PMAS, Precision Mass Airflow Solutions, was created to research, develop and test airflow related products for O.E.M. and aftermarket applications. Through years of experience and the ability to accurately measure precise airflow, PMAS became the leader in precision airflow measurement technology. The company later evolved to manufacture precision lab-grade and commercial high-performance flowmeters with accuracy and performance unmatched in the industry. Over the last 14 years, PMAS has developed many of the best performing mass airflow products in the world – backed up by many airflow related patents. PMAS carries an ever-expanding line of mass airflow sensors and manufactures many other private label products for well-known companies in the industry. In 2015, PMAS realized a technology void in the cold air intake market which subsequently led to a completely redesigned cold air intake solution. PMAS leveraged their experience in fluid dynamics, airflow research, and mass airflow sensor design to create some of the best performing air intakes in the industry. Their experience and knowledgebase provided them with this unique opportunity. PMAS is proud to offer performance solutions that actually work well and do so in the real world. Shop our full selection of PMAS Mass Air Flow Sensors and Cold Air Intakes right here at!
Add to Cart