Easily Install/Remove Your Front License Plate
Use this easy to install 2015-2017 Roush Stage 2 Mustang Sto N Sho detachable license plate bracket easily install and remove your front license plate. This bracket uses high-quality materials such as hand-welded 5052 & 6061 aluminum to make this product. The Sto N Sho detachable license plate bracket is then painted black for long-lasting good looks! This bracket mounts underneath your bumper to allow you to easily install and remove your license plate. When installed, simply pull the release pin and remove the front plate bracket for a clean no plate look. When you need to reinstall, just push the bracket back into the slots until it locks into place.
Drilling IS required to install this bracket properly. Depending on center or off-center mounting, one to two holes must be drilled in the lower air deflector for installation. Refer to the included instructions for additional details on your particular style Mustang.
-Fits 2015-2017 Ford Mustang Roush Stage 2
I was really glad to see a separate one of these for the Roush mustangs added recently, but I did have a little problem. (When I toured the Roush plant, they showed me that Stage 2 and Stage 3 fascia's are the same.) Roush must have changed the front fascia spoiler slightly for 2016 as my front end did not quite match what was in the pictures in the install guide. Their directions say to "Remove the center spoiler screw" and replace with a 4.2mm x50 mm Phillips head screw. My fascia does not have a center screw, but instead has the row of screws mounted with a plastic span between screws directly on the center line. The length of the nylon spaces (1" and 1/2") was still correct to make it fit under the chin spoiler. In the end, it still mounted fine. But I had to make a trip to the hardware store to buy a replacement bolt for the Phillips head screw. (You will need to buy a 6 x 45mm bolt, 2 flat washers, 1 split washer, & 1 nut.) Drill 3 holes instead of 2. Note: This whole license plate bracket is just bolted to the plastic fascia and does not directly connect to the car's metal frame. It feels fairly solid , but hopefully it will hold up over time. Also, I don't think I lost 1/2" of ground clearance as my fascia has a second rubber lip behind the front spoiler that sits about 1" lower.
Big Mike's performance parts brings you the perfect solution for those pesky front license plate laws. Their detachable front license plate brackets allow you to mount your front license plate to the front of your car without having to drill into your front bumper. These easy to use, bolt in brackets are great for car shows and cruising around town. Shop Big Mike's detachable front license plate brackets at Latemodelrestoration.com!
I now have a new 5.0 L 302CID 434 bhp GT. I have installed Flowmaster Mufflers, a K&N Air Filter and a full frontal Clear Bra. I had a 2012 V6 which was featured here on the LMR "Submit My Ride" pag...