2005-2014 Mustang Ford Performance V6 Sway Bar Kit
Ford Performance, formally Ford Racing, created a sway bar kit specifically for the 2005-2014 Mustang V6. These sway bars are 35mm in front and 20.64mm on the rear. Increasing your sway bar size will allow you to experience flatter more precise cornering from your V6 Mustang.
- Designed to be used with M-18000-A dampers and M-5300-N springs. Any performance shocks and springs can be used with these sway bars.
- These can be installed with factory springs and shocks to improve handling.
- Rear anti-sway bar will not work with a sway bar relocation kit.
- 2005-2014 Mustang 4.0L & 3.7L V6
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
Ford Performance Racing Parts - NO WARRANTY - Click Here