Get it by Christmas! Order by December 16, 2016 @ 3pm CT
50 State CARB Legal
Developed w/ Roush
Made In USA
Produces 627HP/540TQ @ 9 PSI & 93 Octane
2.3L TVS R2300 Supercharger
What's in the Box
(1) 2.3L Supercharger
(1) Lower Intake Manifold
(1) Twin 60mm Throttle Body
(1) Air Inlet System
(1) Set 47lb Injectors
This part is 50-state legal - CARB E.O. #: D-418-25
Ford Performance Supercharger Kit
Bolt-on serious horsepower with Ford Performance's 2015-17 Mustang GT supercharger kit! With the help of Roush, Ford Performance has created this 2.3L TVS R2300 twin vortices supercharger kit. This complete kit includes everything you need to install this S550 supercharger on your car safely. This kit includes major supporting mods like 47-pound injectors, intercooler and heat exchanger, twin 60mm throttle body, fuel rails and more! The kit also includes a voucher so you can register for your Ford Performance ProCal tool to properly tune your Mustang after the install. Ford Performance has seen dyno numbers of 627hp @ 6900 RPM and 540 lb-ft of torque @ 4700 RPM at 9 PSI of boost using 93 octane fuel. This supercharger kit is 50 state legal with CARB EO number D-418-25.
Ford Performance Quality
This 2015-17 Mustang supercharger for 5.0 applications features an R2300 TVS supercharger. The new Twin Vortices Series features new four-lobe rotors and high-flow inlet and outlet ports that greatly enhance thermal efficiency, enabling greater volumetric capacity at higher revolutions per minute (RPM). The cooling system is a complete air-to-liquid intercooler system with pump, heat exchanger and intercooler reservoir. The combination of all of this together makes for a high quality, reliable and factory looking kit that probably should have been an option from the factory!
Due to multiple powertrain calibrations, online registration is required to receive calibration tool after purchase. Overseas customers must make special arrangements with their Ford Racing Distributor. Powertrain calibrations are developed and supported for U.S. and Canadian vehicles only Federal and state laws prohibit any person from installing aftermarket add-on or modified parts prior to the sale of a new motor vehicle
Ford Performance Racing Parts Wheel Warranty
FRPP uses the Society of Automotive Engineers (SAE) and American Society for Testing and Materials (ASTM) Standars: SAE J175 and J328 for impact and fatigue testing and ASTM B368 for chrom testing. These standards define a series of tests that ensure the safety and finish o... more
Published on 2015-02-10 In this video, we describe the Ford Racing/Roush Performance Phase 1 Supercharger Kit! We will also have a detailed, step-by-step install video coming soon.
If you are looking to give your S550 a huge increase in power and performance, this 2015 Mustang Roush supercharger kit is the perfect addition. Roush has teamed up with Ford Racing to develop their Phase 1 blower kit that boosts your 2015 GT to a factory claimed 627 horsepower. This supercharger kit is a great way to get the most out of your 5.0 motor while adding the missing piece to the puzzle in your Mustang’s engine bay.
The Roush 2300 blower is a roots style, positive displacement supercharger featuring twin four-lobe rotors. It features Easton's new cutting edge Twin Vortices Series technology, also known as a TVS blower. This technology was used on the previous line of superchargers and has proven to perform greatly. The TVS provides instant throttle response and can generate increased power through the engine's entire power band.
Published on 2015-02-12 In this video, Landan introduces one of the BIGGEST installations Latemodel Restoration.com has completed!
Like any install video here at Latemodel Restoration, we offer ONLY the meat and potatoes, while still covering the smallest of details to produce the BEST install videos on YouTube.
Ford Racing and Roush Performance did a PERFECT job writing the installation instructions for the Phase 1 Supercharger Kit! Before we tackled this install, we pre-read the instructions and figured out a few short cuts to save us a little time and work.
One of which, we did not drain the coolant, since this can be tedious and did not want to risk a potential air pocket in the coolant system. Another quick short cut was NOT removing the water pump. The instructions call for removal to make cutting of the timing cover bosses a little easier. However, pulling the water pump PULLEY is really all you need to do to have a little more cutting room!
Installation should take you around 8-10 hours and will be a good weekend project. You’ll want to have an assortment of tools and decent mechanical knowledge to tackle this installation. Don’t forget, you’ll either need to mail your PCM to Roush, or have your local Ford dealer flash the PCM using the included Roush Tune Voucher.
Ford Performance - Mustang Ford Racing Parts
Ford Performance Parts is the leader in performance parts and accessories for Mustang and Ford Lightning.
LMR.com is proud to offer Ford Racing Performance Parts for your project. Ford Racing is dedicated to manufacturing the highest quality products offered in the industry. Choose from suspension, exhaust, wheels, and other performance parts at LatemodelRestoration.com. If you want the best for your Mustang or SVT Ligtning, look no further than Ford Performance Parts!
I now have a new 5.0 L 302CID 434 bhp GT. I have installed Flowmaster Mufflers, a K&N Air Filter and a full frontal Clear Bra. I had a 2012 V6 which was featured here on the LMR "Submit My Ride" pag...