Benefits
- 430 HP & 475 lb/ft Torque
- Cam-In-Block OHV Design
- Tremec T56 Magnum Trans
- Variable Cam Timing
Features
- 7.3L Displacement
- 10.5:1 Compression
- Forged Steel Crankshaft
- Cast Iron Block & Aluminum Heads
What's in the Box
- (1) 7.3L V8 "Godzilla" Crate Engine
Ford Performance 7.3L "Godzilla" Power Module w/ 6-Speed Transmission
Drop in the beast engine that powers new Super Duty trucks in your project car with Ford Performance's Godzilla power module with 6-speed transmission! Ford Performance's new crate engine, nicknamed Godzilla, comes in at 430 HP at 5,500 RPM with 475 lb/ft of torque at 4,000 RPM. The cam-in-block pushrod design features a cast iron block with aluminum heads that boasts a 7.3L displacement at 10.5:1 compression. Ford Performance power module includes everything you need from the engine, T56 Magnum transmission, bellhousing, PCM with calibration, starter, flywheel, clutch, and all the needed accessories to get you up and running.
Tremec 6-Speed Transmission
To back up your new Godzilla engine, Ford Performance includes a new Tremec T56 Magnum transmission. This transmission can handle up to 700 lb-ft of torque and provides crisp, clean shifts throughout the RPM range. Gear ratios are 2.66 first, 1.78 second, 1.30 third, 1.00 fourth, 0.80 fifth, 0.63 sixth, and 2.90 reverse. Included is everything needed for installation: bellhousing, clutch, flywheel, clutch fork, pilot bearing, and throwout bearing!
Ford Performance Control Pack
Complete your project by easily wiring up your 7.3L Godzilla crate engine with a manual transmission with this Ford Performance control pack! This kit takes the guesswork out of the engine swap. Designed to run 430hp and 475 ft-lbs of torque from the Ford Performance 7.3L Godzilla! Ford Performance's unique control pack harness replaces the stock engine harness and is designed for custom vehicle builds. Eliminating throttle cable routing problems by having an electronic throttle controller for the drive-by-wire accelerator pedal. Bullitt 87mm throttle body with adapter along with a custom airbox and MAF sensor. The PCM comes with a Ford Performance calibration installed to get you up and running!
Engine Specs
- 7.3L displacement
- 430 HP at 5,500 rpm
- 475 lb/ft of torque at 4,000 rpm
- 10.5:1 compression
- Bore 107.2 mm x stroke 101.0 mm
- Cast iron block
- Aluminum cylinder heads
- Exhaust valve diameter 42.53 mm
- Intake valve diameter 55.13 mm
- Lift (intake/exhaust) 13.67 mm / 15.26 mm
- Cam-in-block OHV design w/variable cam timing
- Forged steel crankshaft
- Cast Aluminum pistons
- Port fuel injection
- Firing order: 1-5-4-8-6-3-2-7
- The bellhousing bolt pattern is the same as 4.6/5.4 and 5.0 Coyote
- Engine weight: 580 lbs
Includes:- 7.3L Godzilla Crate Engine
- Tremec 6-speed transmission
- T56 Bellhousing (Not Pictured)
- Starter and index plate M-11000-SD73
- Clutch assembly M-7560-T46
- Billet steel 8-bolt flywheel M-6375-G46A
- Clutch lever M-7515-A
- Throwout bearing M-7548-A
- Hi-load roller pilot bearing M-7600-C
- PCM with Ford Performance calibration
- Electronic throttle pedal
- Mustang Bullitt airbox
- 87mm Bullitt M-9926-M50B throttle body w/M-9474-M5087 adaptor
- Alternator and bracket
- Power steering pump
- Tensioner
- Belt
- installation hardware
- Composite Intake manifold and 80 mm throttle body
- Left and Right exhaust manifold
- 8-quart aluminum oil pan/coole
- Ignition coils and wire
Ford Performance Racing Parts "Packs" and Component Parts Limited Warranty - Click Here
Ford Performance Racing Parts - NO WARRANTY - Click Here
Ford Performance Racing Parts Crate Engine Limited Warranty - Click Here
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
