Get it by Christmas! Order by December 16, 2016 @ 3pm CT
Increased Horsepower & Torque
60+ Horsepower Increase
Power up to 6400 RPM
FPRP "B" Camshaft
Edelbrock RPM Air Gap Intake
What's in the Box
(1) Ford Performance XBE Top End Kit
Ford Performance XBE Top End Kit
Easily bolt on 60+ horsepower to your Mustang with this Ford Performance XBE top end power pack! The XBE, X-head B-Cam Edelbrock Intake, top end kit is a combination of proven parts that make a drastic improvement over your stock top end. This combination provides great throttle response and power up to 6400RPM! The kit includes matched hydraulic roller lifters(M-6500-R302), tie bars, retainer plate, roller timing chain, and gear set.
M-6049-X306 Aluminum Cylinder Head
This kit features Ford Performance X aluminum heads that are pre-assembled with beehive springs. These heads flow up to 185 CFM straight out of the box. These heads have a 64cc combustion chamber with 178cc intake port volume and 62cc exhaust volume.
Technical Info Brand: Ford Racing Manufacturer's Part Number: M-6049-X306 Cylinder Head Style: Assembled Cylinder Head Material: Aluminum Combustion Chamber Volume (cc): 64cc Intake Runner Volume (cc): 178cc Exhaust Runner Volume (cc): 62cc CNC-Machined Intake Runner: No CNC-Machined Exhaust Runner: No Intake Valve Diameter (in): 1.940 in. Exhaust Valve Diameter (in): 1.540 in. Outside Diameter of Outer Spring (in): 1.500 in. Number of Springs Per Valve: Single Rocker Arms Included: No Guideplate Pushrod Size: 5/16 in. Accessory Bolt Holes Drilled: Yes Oiling Style: Through pushrod Machined for O-Ring: No Heat Crossover: No
Ford Performance M-6250-B303
The included B camshaft was designed specifically for the included X306 cylinder heads. This Mustang B Cam offers a more aggressive idle and excellent low-end torque. While it adds a noticeable power improvement, it maintains great drivability characteristics for daily driving. Fits roller engine blocks only.
-Intake and Exhaust Lift 0.480” with a 1.6:1 rocker arm.
-Intake and Exhaust Duration - 224°@0.050” lift.
-Higher stall torque converter recommended for automatic transmission.
Edelbrock Performer RPM Air Gap Intake
Edelbrock designed this intake manifold to increase horsepower and torque by allowing your air/fuel mixture to run cooler. They accomplished this by raising up the intake so that there is a gap underneath the intake runners for cool air to run through. The cooler air results in a denser charge for more power. The intake has an operating range of 1,500 to 6,500 RPM.
Recommended Parts For Installation
-M-6051-D50 Head Gasket and Bolt Kit
-M-6588-A50 Rocker Channel Kit
-M-6529-A302 Rocker Arm Pedestal Shim Kit
-M-6287-B302 Fuel Pump Eccentric
-Ford Racing Spark Plug Wires
Fitment Note -THIS TOP END KIT IS DESIGNED TO WORK WITH A ROLLER BLOCK ONLY. IT WILL NOT WORK IN NON-ROLLER BLOCKS!!!
- Will only work with 85-95 5.0L Factory Roller Block or Aftermarket Roller block.
Ford Performance - Mustang Ford Racing Parts
Ford Performance Parts is the leader in performance parts and accessories for Mustang and Ford Lightning.
LMR.com is proud to offer Ford Racing Performance Parts for your project. Ford Racing is dedicated to manufacturing the highest quality products offered in the industry. Choose from suspension, exhaust, wheels, and other performance parts at LatemodelRestoration.com. If you want the best for your Mustang or SVT Ligtning, look no further than Ford Performance Parts!
Products by Vehicle
Email Me When It's Back In Stock!
Email Me When It Arrives!
Upload a Picture
Upload your own picture of the Mustang Ford Performance XBE Top End Power Pack 5.0
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LMR.com ® permission to use it in future advertisements and promotions.
I have been restoring my car for a long time. The engine is a 331 stroker afr 185 heads, trick flow r series intake, 1 3/4 in long tubes with flow master dumps. Sounds awesome and love it every ride. ...