Raises Height Of Intake To Clear After-Market Valve Covers
CNC Machined Construction
Made Of Phenolic Material
Correct Length Hardware
Fits Stock Intakes
What's in the Box
(1) 1/2" Phenolic Spacer
(2) Intake Gaskets
(4) 2" Intake Bolts
(2) 6 1/4" Intake Bolts
(6) Flat Washers
Mustang Factory Intake Spacer
New and improved quality, this Ford Racing M-9486-A51 intake spacer is made-in-the-U.S.A. & CNC machined from Westinghouse Type C phenolic material. It fits between the upper and lower manifolds to help dissipate heat and significantly increase performance. In addition to the performance enhancement, these spacers also provide additional intake to valve cover clearance. Kit includes longer bolts and gaskets needed for installation.
This product is necessary for the best fit if you are using the trick flow valvecovers on you 94 or 95 5.0 that has the upper intake were the turn in the intake that attaches to the throttle body is cast as one piece there is however 2. Small issues 1) the bolts that are shipped with it. There are only two bolts in the kit that are right to solve this you will need to replace the two long bolt with two that are 5.50 inches long. Move the two original long bolts from the center of the intake to the long bolt positions at the front and rear of the intake and use two of the short bolt from the kit. other than that the product served my purpose well and if there is a performance plus than that will be a bonus
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Good fit. Had no issues.
Travis F. on
This is a must with most after market valve covers.
Ford Performance - Mustang Ford Racing Parts
Ford Performance Parts is the leader in performance parts and accessories for Mustang and Ford Lightning.
LMR.com is proud to offer Ford Racing Performance Parts for your project. Ford Racing is dedicated to manufacturing the highest quality products offered in the industry. Choose from suspension, exhaust, wheels, and other performance parts at LatemodelRestoration.com. If you want the best for your Mustang or SVT Ligtning, look no further than Ford Performance Parts!
I have been restoring my car for a long time. The engine is a 331 stroker afr 185 heads, trick flow r series intake, 1 3/4 in long tubes with flow master dumps. Sounds awesome and love it every ride. ...