Get it by Christmas! Order by December 16, 2016 @ 3pm CT
Better Steering Response
Made In The USA
Black Powdercoat Finish
1.25" DOM Steel Tubing
SN95 Style Ball Joints
What's in the Box
(1) Pair Forward Offset Control Arms
Great Steering Response!
Finish off your coil over conversion with these forward offset front control arms from Maximum Motorsports! The advanced geometry in this control arm will improve handling as well as create a tighter turning radius! By removing the spring perch along with the tubular design; you will be dropping a combined 13.5 pounds from the front of your 1979-1993 Mustang! Fender modification is necessary due to the small fox Mustang fenders. This set features a Delrin bushing which offers zero deflection. This is ideal for track use. Street use will see an increase in noise, vibration, and harshness compared to urethane bushings.
Maximum Motorsports has used a unique and true A-arm design that maximizes rigidity and equally absorbs all impact into the K-member. The arms are gusseted in strategic locations to ensure the control arm will bend in an accident, absorbing energy, before a weld will ever break. The smaller bushing design helps create a quicker steering response. All Maximum Motorsports control arms feature low friction ball joints greater ride quality and handling. These arms will move the wheelbase 1 1/2" forward with MM K-member and 3/4" forward with the factory K-member.
Does NOT fit 1984-1986 SVO Mustang.
- Fits 1979-1993 Ford Mustangs
The suspension bushings included with this part can only be lubricated with PTFE grease, also referred to as "Marine Grease". PTFE grease is a very sticky, opaque grease that is water proof and will not degrade the bushing material. If lubed properly at installation, these bushings will not need to be lubricated again. Use of any other grease on these bushings will cause the bushing to fail and any bushing warranty to be voided.
Maximum Motorsports is well respected as a leading developer of suspension systems and performance parts for your Mustang or Lightning. Established in 1992, the team at MM has spent countless hours researching and developing the highest quality suspension components for 1979-Present Mustangs and 1993-Present SVT Lightnings. Maximum Motorsports has strived to produce lightweight, direct replacement suspension parts to get your vehicle handling, launching, and cornering better than ever. Shop LatemodelRestoration.com for performance panhard bars, k-members, subframe connectors, steering racks, caster/camber plates. chassis braces, control arms, roll bars, wheel spacers, and other tubular suspension parts.
Ihave had a few Mustangs starting with the red one it is a factory took it through some restoration made it sterling grey with black stripes very fun cars to work with now have a 1991 5.0 factory 5 sp...