Get it by Christmas! Order by December 16, 2016 @ 3pm CT
Adjustable Ride Height
Large Spherical Bearing At Both Ends
Strong Steel Tube Construction
Made In The USA
What's in the Box
(1) Pair Of Assembled Rear Lower Control Arms
Required Hardware & Grease
Maximum Motorsports Adjustable Drag Race Rear Lower Control Arms
Fine tune your 1999-2004 Mustang's suspension in a major way by adding a set of these adjustable rear lower control arms from Maximum Motorsports! The Drag Race series adjustable control arms are intended for Mustang's with a power level exceeding the 600rwhp rating of MM's curved adjustable control arms. The straight tube of these control arms was designed for launching a Mustang weighing up to 3,800 lb that has a 60-foot time as quick as 1.20 seconds. That rating is for a standard 4-link suspension. If you Mustang is equipped with a torque-arm, the loads on the rear lower control arms are much lower, and in that case the MM Drag Race control arms are suitable for engines far exceeding 1,000 ft-lb of torque.
Adjustable Ride Height
These control arms are adjustable, meaning that you have the power to change your Mustang's instant center location to tune the anti-squat percentage for optimum traction.
These control arms are equipped with large spherical bushings at both ends of the control arms to completely eliminate unwanted deflection, while allowing proper articulation of the suspension.
-Fits 1999-2004 Ford Mustang
- These are intended for drag racing only! These control arms do not have provision for rear sway bar. Removal of sway bar can cause unwanted body roll in daily driving situations.
Maximum Motorsports is well respected as a leading developer of suspension systems and performance parts for your Mustang or Lightning. Established in 1992, the team at MM has spent countless hours researching and developing the highest quality suspension components for 1979-Present Mustangs and 1993-Present SVT Lightnings. Maximum Motorsports has strived to produce lightweight, direct replacement suspension parts to get your vehicle handling, launching, and cornering better than ever. Shop LatemodelRestoration.com for performance panhard bars, k-members, subframe connectors, steering racks, caster/camber plates. chassis braces, control arms, roll bars, wheel spacers, and other tubular suspension parts.
I have been restoring my car for a long time. The engine is a 331 stroker afr 185 heads, trick flow r series intake, 1 3/4 in long tubes with flow master dumps. Sounds awesome and love it every ride. ...