2015-2020 Mustang Nitrous Outlet Plate Kit | GT350 Nitrous Kit by Nitrous Outlet

Mustang GT350/GT350R Nitrous Plate Kit
Dramatically increase your Mustang's horsepower with this Mustang GT350/GT350R nitrous plate kit from Nitrous Outlet! When looking to step up the power without breaking the bank, Nitrous Outlet has you covered with this direct bolt-on nitrous plate kit! This kit utilizes a Mustang-specific solenoid bracket & pre-bent stainless hard lines to connect the solenoids to the plate. This is THE Nitrous Kit you want for your new 2015-2020 Mustang GT350/GT350R!

GT350/GT350R Specific Nitrous Plate
Designed from CNC machined billet aluminum with a corrosion-resistant black anodized coating for great looks and reliability! The internal fuel and nitrous passages, as well as the discharge passages, are precision drilled for precise flow and atomization. The design is based on over a year of R&D spanning 3 different designs before finding the perfect solution. It is sealed to the intake using factory O-ring gaskets & will support a 400+ horsepower shot. This is the only 2015-2020 Mustang Nitrous Plate you need to look at.

Fuel Line Adapter
The billet aluminum fuel rail adapter makes tapping into your fuel system a snap for adequate fuel supply for your new 2015-2020 Mustang GT350/GT350R nitrous system. It is CNC machined for a perfect fit and black anodized for long-lasting good looks. It goes between the fuel supply hose and the fuel rail & includes an extra 1/8" NPT port for use with a pressure gauge (gauge not included).

10LB Nitrous Bottle
The included nitrous bottle is of the 10Lb variety & is covered in a gloss black powdercoat. The black anodized high flow billet bottle valve finishes off the look. The bottle valve also features two 1/8" NPT ports in the side that allow easy additions of nitrous pressure gauges, nitrogen assisted pressure systems or nitrous pressure sensors. The nitrous bottle is held in place with dual stainless steel band type bottle brackets.

Additional Parts
This Mustang GT350/GT350R Nitrous Kit Wet Plate System also includes all the braided lines, fittings, brackets, switches, relays, connectors and hardware you'll need for a basic installation. The kit is adjustable from 50-200 horsepower, but what if 200 horses not enough for you? Not a problem! You can upgrade the stainless braided feed line, bottle nipple and solenoids fittings to support over 400 HP! This Mustang nitrous system solenoids can support up to a 400 horsepower shot if your fuel system & engine are up to the task. Additional jetting is required for shots over 200 HP. (Please remember that having a properly built engine & adequate fuel system along with a solid computer tune are all absolute necessities with nitrous.)

Technical Notes

When installing nitrous on any car, we strongly recommend that you change to a colder set of spark plugs. Also tune your timing and air-fuel ratio accordingly.

The included jetting is for gasoline use. If you are running E85 you will need to purchase additional jetting.

Window switch is strongly recommended for installation.

This Nitrous Kit includes a WOT microswitch for activating the kit at WOT. For digital TPS activation, We recommend NO-0061001

Application

Fits 2015-2020 Mustang GT350/GT350R

Fits 2015-2022 Mustang GT's with the GT350 intake manifold

This product is intended for off-road use only, and is not legal for use in emission restrictive states. Off-Road Disclaimer

Disclaimer
With the addition of a nitrous, turbo, or supercharger kit; custom tuning will be required for your car to run properly and safe.

Fitment Note

Due to the spacer between the intake manifold and throttle body, modifications to the intake tube and/or other components may be required for proper clearances.

Nitrous Outlet Warranty - Click Here