Nitrous Outlet 4.6L 3V Plate Kit
- Includes jetting for 50-200 HP
- Fits 3V Mustang intakes
- Billet Aluminum Nitrous Plate
- Billet Bottle Valve
- .122 Orifice Nitrous Solenoid
- .187 Orifice Fuel Solenoid
Get your 2005-2010 S197 Mustang putting out some serious horsepower with this Nitrous Outlet single plate nitrous kit. This single-stage kit comes with a billet aluminum plate to fit your 2005-2010 Mustang intake manifold and is capable of flowing up to 400 HP. This system includes all of the necessary components billet aluminum nitrous plate, 50-100-150-200 HP jetting, hardware, and wiring to properly install a wet nitrous system on your vehicle.
05-10 3 Valve Mustang GT Nitrous Plate Conversion
05-10 4.6/5.4L 3V Ford Billet Fuel Rail Adaptor
18" -4AN Stainless Braided Hose (Red Fittings)
24" -3AN Stainless Braided Hose (Red Fittings)
24" -3AN Stainless Braided Hose (Black Fittings)
192" -4AN Stainless Braided Hose (Black Fittings)
Universal Solenoid Brackets
.122 Nitrous Solenoid Flows 500 HP 27 Amp Draw
.187 Fuel Solenoid
Relay and relay pigtail connector.
Duckbill Toggle Switch
System Hardware Pack
Standard 10lb/15lb Stainless Nitrous Bottle Bracket
10lb Nitrous Bottle & High Flow Billet Bottle Valve With 4an Bottle Nipple
63.5MM Plate Openings
Max Flow - 400HP
Nitrous Solenoid Size - .122 Orifice
Fuel Solenoid Size - .187 Orifice
Main Feed Line Size - 4AN
Fuel Pressure - 55 PSI
When installing nitrous on any car, we strongly recommend that you change to a colder set of spark plugs. Also, tune your timing and air-fuel ratio accordingly.
The included jetting is for gasoline use. If you are running E85 you will need to purchase additional jetting.
Window switch is strongly recommended for installation.
This Nitrous Kit includes a WOT microswitch for activating the kit at WOT. For digital TPS activation, We recommend NO-0061001
Fits 2005-2010 Mustang GT
This product is intended for off-road use only, and is not legal for use in emission restrictive states. Off-Road Disclaimer
With the addition of a nitrous, turbo, or supercharger kit; custom tuning will be required for your car to run properly and safe.
Due to the spacer between the intake manifold and throttle body, modifications to the intake tube and/or other components may be required for proper clearances.
Nitrous Outlet Warranty - Click Here